Dreamcast-Talk.com

rpf16rj wrote: ↑Tue Apr 30, 2024 10:41 am

pcwzrd13 wrote: ↑Tue Apr 30, 2024 10:20 am

rpf16rj wrote: ↑Tue Apr 30, 2024 10:13 am Hi @pcwzrd13, can add this two modes for Controller

C - ASCII Fighting (8bitdo M30)
Z - Arcade Stick (8bitdo M30)

Are these modes that Megavolt added specifically for this controller? Do you have to hold another button before pressing these?

Yes, only this pad, Home + C and Home + Z.

Ok, added.

@pcwzrd13
I'm wondering if adding a wireless knockoff 360 controller to the Wiki would help some people out?
https://www.amazon.com/Replacement-Xbox ... 0CPLPMC93/
It has performed above & beyond my expectation. Quality is quite good. Full support, including rumble. Just plug in the receiver and go. Also works with the WingmanSD.

MoeFoh wrote: ↑Tue Apr 30, 2024 11:06 am @pcwzrd13
I'm wondering if adding a wireless knockoff 360 controller to the Wiki would help some people out?
https://www.amazon.com/Replacement-Xbox ... 0CPLPMC93/

Added

@pcwzrd13
Nice work on the Wiki page - this will help a lot of people out.

@megavolt85
Maybe add the Wiki link to post #1?

added latest firmware and link to wiki to first post

8bitdo M30 Configuration (Wired Mode):

I think I got it figured out.

D-input mode (controller off, turn on with start + b, plug in cable) (super important)
D-pad mode (select + up for 5 seconds)

Gamepad does not have any rumble motors.

We now have 2 new modes for a total of 6.
New: Arcade Stick mode (home + z), supports buttons a through z, lb = z rb = c
New: ASCII Pad FT mode (home + c), button layout is same as above

Twin Stick mode (home + y) layout:

- first stick
d-pad

- second stick
y = up
a = down
x = left
b = right

select = d (pause)

lb = face button x
rb = face button a
z = face button y
c = face button b

Amazon (US): https://www.amazon.com/8BitDo-Bluetooth ... 08FSGT34S/

Manual: https://download.8bitdo.com/Manual/Cont ... f?20220513

Power Stone with 2nd Player using M30 in Arcade Stick mode:

@megavolt85
I have an 8bitdo Pro 2 controller (a powerhouse of controllers).
I put it in d-input mode and made a log file. Didn't work in x-input mode (wired xbox 360 emulation).
What else do I need to do so you can update the firmware for support?
It says 1 HID report - is there debug firmware I should install? Manual: https://download.8bitdo.com/Manual/Cont ... f?20231201

MoeFoh wrote: ↑Wed May 01, 2024 10:11 am It says 1 HID report - is there debug firmware I should install?

megavolt85 wrote: ↑Wed May 01, 2024 12:21 pm

MoeFoh wrote: ↑Wed May 01, 2024 10:11 am It says 1 HID report - is there debug firmware I should install?

usb4maple_debug.7z

pro2 debug report: