USB4MAPLE adapter

[MoeFoh]

Is there a list with VID/PID codes that are compatible?
Should a XBox One Gamepad VID_045E & PID_02FF work?

You would need to add one of the Mayflash adapters such as: https://www.mayflash.com/product/magic_ns_lite.html set as x-input.

[megavolt85]

Did you change a setting in the last firmware?

no

[IMACOMPUTA]

Hi,
Is there any chance that this 8bitdo Switch & PC Arcade Stick could be supported by USB4MAPLE?


Or the 8bitdo Ultimate 2C?

[ILAH]

Is there a list with VID/PID codes that are compatible?
Should a XBox One Gamepad VID_045E & PID_02FF work?

You would need to add one of the Mayflash adapters such as: https://www.mayflash.com/product/magic_ns_lite.html set as x-input.

I would like to connect over cable. Is it possible to add devices on my own?

[MoeFoh]

Is there a list with VID/PID codes that are compatible?
Should a XBox One Gamepad VID_045E & PID_02FF work?

You would need to add one of the Mayflash adapters such as: https://www.mayflash.com/product/magic_ns_lite.html set as x-input.

I would like to connect over cable. Is it possible to add devices on my own?

Over cable, you would need to use: https://www.mayflash.com/product/magic_ns_2.html

No, to your question.

[enfilade]

Hey everyone, I added a display to my usb4maple tonight but I am not getting any output to the screen. Using Openmenu of course and a thumbdrive. However my thumbdrive is also no longer being detected as a virtual vmu.

I updated to the latest firmware. Checked the wiring twice, it looks good.

Xbox360 controller and mouse are still functional. Just not the thumbdrive it seems.

Anyone have any ideas?

[MoeFoh]

Hey everyone, I added a display to my usb4maple tonight but I am not getting any output to the screen. Using Openmenu of course and a thumbdrive. However my thumbdrive is also no longer being detected as a virtual vmu.

I updated to the latest firmware. Checked the wiring twice, it looks good.

Xbox360 controller and mouse are still functional. Just not the thumbdrive it seems.

Anyone have any ideas?

The screen won't work until the virtual VMU works. I found that out when I put my screen together.
My adapter is finicky out which USB Drives it works with. I ended up using an older 16GB Kingston 2.0 drive (FAT32).

[enfilade]

The screen won't work until the virtual VMU works. I found that out when I put my screen together.
My adapter is finicky out which USB Drives it works with. I ended using an older 16GB Kingston 2.0 drive (FAT32).

Thanks so much for the reply! It turned out to be my 4port usb hub I think. It started working when I finally had the controller and thumbstick plugged in the right ports. Weird though, I never had that issue before I updated firmware. Oh well! Atleast it works now. Thanks again.

Using a cheap 32gb drive, fat32

Video:
https://youtube.com/shorts/WETreKe2qu0? ... aoZEbv1_fz

Pictures:

[LeSpank]

Not a huge issue but I am unable to save a game on the Japanese version of Sega Rally 2 using usb4maple with open menu.

The game just says something about a memory card error.

[ItalianGrandma]

Kind of a dumb question, but I'll ask anyways....

Does USB4Maple work with a cheap DC>USB adapter so I could just user a standard DC controller with it? I was just thinking that then I could use the virtual VMU feature paired with a regular controller.

I know I could also just plug USB4Maple into another controller slot and plug in another controller, but I was trying to do it without having to use another controller slot (though, I guess it's not really a big deal).