USB4MAPLE adapter

[MoeFoh]

@megavolt85
Retro-Bit Genesis 8-Button Gamepad
Log report:

PuTTY.8bit-retro.wired-genesis-8button.debug.log.txt

(964 Bytes) Downloaded 65 times

Works with Mayflash Magic NS 2 with x-input in default Dreamcast controller mode only. Guide = start + a, unable to switch modes. Gamepad-tester.com shows the 2 buttons being pressed - not a single guide button - so I'm confused.

Also annoying, no led's to show whether the gamepad is in x-input or d-input mode & configuration can't be saved to the gamepad - always starts up in d-input mode.

[megavolt85]

Retro-Bit Genesis 8-Button Gamepad

click any button once, look at end of log string with button state

[pcwzrd13]

@Megavolt I'm trying out a Tecknet EWM01832 wireless mouse with the adapter but it doesn't seem to recognize it at all. Do you need to add the VID and PID? If so, here they are: VID: 25A7 PID: FA61.

[MoeFoh]

Retro-Bit Genesis 8-Button Gamepad

click any button once, look at end of log string with button state

Tried that, but it's just not seeing any pressed button input. I'll check again. Does that mean forget about this one as a direct connect?

I also have a wired Legacy16 SNES. At least it has a home button so I can change modes.

[megavolt85]

@Megavolt I'm trying out a Tecknet EWM01832 wireless mouse with the adapter but it doesn't seem to recognize it at all. Do you need to add the VID and PID? If so, here they are: VID: 25A7 PID: FA61.

Unfortunately, some wireless mice have two interfaces, one for the mouse and one for the keyboard, even if the keyboard is not included.
the adapter connects only the first interface and if the keyboard is the first, the mouse will not work

Does that mean forget about this one as a direct connect?

yep

[pcwzrd13]

@Megavolt I'm trying out a Tecknet EWM01832 wireless mouse with the adapter but it doesn't seem to recognize it at all. Do you need to add the VID and PID? If so, here they are: VID: 25A7 PID: FA61.

Unfortunately, some wireless mice have two interfaces, one for the mouse and one for the keyboard, even if the keyboard is not included.
the adapter connects only the first interface and if the keyboard is the first, the mouse will not work

I don't think that's the issue. This brand sells mostly just mice. They have one keyboard and mouse combo but it's not this mouse. If you look up the receiver model #2AK8Q-EWM01832, it just shows results for mice.

[megavolt85]

check in VMU Maneger how i's detected

[pcwzrd13]

check in VMU Maneger how i's detected

Hmmm, yeah, it shows up as a keyboard. Weird. So there's nothing that can be done to get it to work? I just bought it so I guess I can return it if it's not Dreamcast compatible.

[megavolt85]

unfortunately the only way to fix this is to add a physical switch to a free GPIO

[MoeFoh]

@megavolt85
I could get no input from either of my wired Retro-Bit controllers after re-testing.

Any ideas how the wired Retro-Bit Saturn USB was made to work/configured?