@megavolt85
I just connected up my Horipad for Switch and it has the same PID, VID as the wired Retro-Bit Legacy16 you just added support for.
https://stores.horiusa.com/horipad-for-nintendo-switch/
HORIPAD S (STANDARD GAMEPAD Vendor: 0f0d Product: 00c1)
It is working with usb4maple as an ASCII Stick as expected.
A search for VID:0F0D does indeed show Hori.
https://devicehunt.com/view/type/usb/ve ... vice/00C1/
https://steamcommunity.com/groups/Steam ... 796655042/
USB4MAPLE adapter
Moderators: pcwzrd13, deluxux, VasiliyRS
- redjeff76
- Anarki
- Posts: 90
Re: USB4MAPLE adapter
So cool to be able to use my 8bitdo SNK Neo Geo controller with the USB4Maple adapter! THANKS
- rpf16rj
- lithium
- Posts: 36
- Location: Brazil
- Contact:
Re: USB4MAPLE adapter
8bitdo has differents versions for each pad, M30 that you added support is bluetooth version for PC and Switch. This version of @maonaluva that testing is for Mega Drive real console and PC with USB adapter Receiver or Mega Drive Receiver.megavolt85 wrote: ↑Fri May 03, 2024 6:12 pm I'm sure you don't have the same controller that I added.
I'm testing Logitech 3D Xtreme joystick and is amazing, thanks for add support on this.
Curious tester of old games and software and electronic modder sometimes.
Youtube channel: https://www.youtube.com/@rpf16rj1
Youtube channel: https://www.youtube.com/@rpf16rj1
- MoeFoh
- Outrun
- Posts: 1142
Re: USB4MAPLE adapter
@megavolt85
8bitdo NEOGEO with debug.
Displays the message:
PANIC
Invalid Speed
Using latest debug firmware.
8bitdo NEOGEO with debug.
Displays the message:
PANIC
Invalid Speed
Using latest debug firmware.
- redjeff76
- Anarki
- Posts: 90
Re: USB4MAPLE adapter
the newest beta or debug FW from the 8bitdo updater program. Like it's not just the standard update. I don't remember where, but after you connect you controller look under options or something. It also made the controller bluetooth capable without any dongle for the Analogue Pocket.
I have experienced no "speed" issues and I have not gotten a "Panic" message. Could the issue be the cord you are using perhaps?
My controller works just fine
I have experienced no "speed" issues and I have not gotten a "Panic" message. Could the issue be the cord you are using perhaps?
My controller works just fine
- MoeFoh
- Outrun
- Posts: 1142
Re: USB4MAPLE adapter
Thanks. I'm on v1.09 beta. Yes, you have to tick the beta boxredjeff76 wrote: ↑Fri May 03, 2024 7:30 pm the newest beta or debug FW from the 8bitdo updater program. Like it's not just the standard update. I don't remember where, but after you connect you controller look under options or something. It also made the controller bluetooth capable without any dongle for the Analogue Pocket.
I have experienced no "speed" issues and I have not gotten a "Panic" message. Could the issue be the cord you are using perhaps?
My controller works just fine
from the about box to receive betas. What position is the switch in - bt ot 2.4g? Did you need to use the pairing button before connecting the cable? I'll continue to investigate.
Are you using a pico or a waveshare zero board?
- redjeff76
- Anarki
- Posts: 90
Re: USB4MAPLE adapter
no need to use the pairing button. Just plug and play. I did not move the switch. It's in BT position, but when plugged in the switch has no function. The controller just worked normally when I plugged it in. Much like my PS4 controller.
I believe it is the Waveshare Zero board. It is an adapter that pcwzrd13 made and sells. I bought 1 from him cause I can't solder. I must also say that the shell he made for it looks, feels, and functions very professional. I am very impressed. I love the pinhole he made for easy updating of FW too. For all I got, it was worth the money imo.
I believe it is the Waveshare Zero board. It is an adapter that pcwzrd13 made and sells. I bought 1 from him cause I can't solder. I must also say that the shell he made for it looks, feels, and functions very professional. I am very impressed. I love the pinhole he made for easy updating of FW too. For all I got, it was worth the money imo.
- megavolt85
- Developer
- Posts: 1959
Re: USB4MAPLE adapter
if is have wired connection try it
Just so I noticed that I don’t like companies that use someone else’s VID and PID and at the same time their controllers are different.
make me a log from HORI PAD, I will try to add mode switching so that can use analogues
- MoeFoh
- Outrun
- Posts: 1142
Re: USB4MAPLE adapter
I'm suspecting the rp pico board is the issue. Tried my 2nd NEOGEO gamepad and a different cable with the same result. Manually did a re-flash of v1.09 with the same result. I do have a waveshare zero board (which is what you have), but I have not put anything together yet.redjeff76 wrote: ↑Fri May 03, 2024 7:45 pm no need to use the pairing button. Just plug and play. I did not move the switch. It's in BT position, but when plugged in the switch has no function. The controller just worked normally when I plugged it in. Much like my PS4 controller.
I believe it is the Waveshare Zero board. It is an adapter that pcwzrd13 made and sells. I bought 1 from him cause I can't solder. I must also say that the shell he made for it looks, feels, and functions very professional. I am very impressed. I love the pinhole he made for easy updating of FW too. For all I got, it was worth the money imo.