USB4MAPLE adapter

[megavolt85]

where? i'm look only for D-input

[megavolt85]

Ok, added.

add 8BitDo Pro 2 (D-Input mode)
for 8BitDo M30 add remark, need enable D-Input mode

[MoeFoh]

@megavolt85
8bitdo broke the wired x-input mode on the Pro 2 with a firmware update, so that's a no go.

I also have a sn30pro+ controller (the Pro 2 is the upgraded version of this). Here's that log when the controller is in x-input mode:

PuTTY.sn30pro+.debug.log.txt

(1.99 KiB) Downloaded 9 times

[megavolt85]

x-input don't have desc report, is normal

[megavolt85]

I also have a sn30pro+ controller (the Pro 2 is the upgraded version of this). Here's that log when the controller is in x-input mode:
PuTTY.sn30pro+.debug.log.txt

I don’t understand, sn30pro+ doesn’t work? judging by the log it completely emulates a wired x360 controller and must work on usb4maple

but I looked at your log and at my code and I got an idea why the myflash adapter doesn’t vibrate, maybe it doesn’t emulate just one command and I can fix it

[megavolt85]

8bitdo broke the wired x-input mode on the Pro 2 with a firmware update, so that's a no go.

test vibration with myflash adapter

USB4MAPLE(Myflash vibration test).7z

(46.96 KiB) Downloaded 14 times

[pcwzrd13]

@Megavolt Vibration works now! You're awesome!

Also updated the Wiki with all the latest stuff.

[MoeFoh]

@megavolt85
You're right, sn30pro+ is working in x-input mode. The broken Pro 2 threw me off.

From 8bitdo, also tested & working with x-input in all 4 modes:
M30 & Lite

[megavolt85]

The broken Pro 2 threw me off.

what in log when you connect Pro 2 in xinput mode?

[MoeFoh]

The broken Pro 2 threw me off.

what in log when you connect Pro 2 in xinput mode?

I never get that far - won't initialize properly. Super broken - it use to work on the WingmanSD in wired x-input mode - now it doesn't. It does work with Bluetooth using the Mayflash adapters in x-input mode, however.