Professional skills!rpf16rj wrote: ↑Mon Jan 20, 2025 4:31 pm Hi guys, hope all are fine.
Here is my little project 3d printing enclosure for display 1306 to attach to the joypad. The first prototype was created for Xbox 360 Wireless pad, but i plan to create it for PS4, Dual Sense, too.
20250120_074422.jpg
20250120_074413.jpg
20250120_002833.jpg
20250120_002813.jpg
20250120_002809.jpg
20250120_002804.jpg
20250120_002749.jpg
Hey @megavol85, can you generate an FW version with display OLED support but without reducing the sensitivity of the right stick and without a feature that keeps the same vmu.bin when the power is off?megavolt85 wrote: ↑Tue Dec 31, 2024 1:46 pm I think I understand what you're talking about, the thing is that for compatibility with all the original games, the sensitivity of the right stick was reduced by six times
Code: Select all
ID device address = 1, instance = 0 is mounted
HID Interface Protocol = None VID = 2DC8 PID = 301C
HID has 1 reports
VID = 2dc8, PID = 301c
Protocol 0
HID receive desc report:
06 A0 FF 09 01 A1 01 85 02 15 00 26 FF 00 19 01
29 02 75 08 95 3F 81 02 85 81 15 00 26 FF 00 19
01 29 02 75 08 95 3F 91 02 C0
HID device address = 1, instance = 0 is unmounted
HID device address = 1, instance = 0 is mounted
HID Interface Protocol = None VID = 2DC8 PID = 301C
HID has 1 reports
VID = 2dc8, PID = 301c
Protocol 0
HID receive desc report:
05 01 09 05 A1 01 85 01 15 00 25 01 35 00 45 01
75 01 95 0F 05 09 19 01 29 0F 81 02 95 01 81 01
05 01 25 07 46 3B 01 75 04 95 01 65 14 09 39 81
42 65 00 95 01 81 01 26 FF 00 46 FF 00 09 30 09
31 09 32 09 35 75 08 95 04 81 02 05 02 15 00 26
FF 00 09 C4 09 C5 95 02 75 08 81 02 05 08 09 43
15 00 26 FF 00 35 00 46 FF 00 75 08 95 02 91 82
09 44 91 82 09 45 91 82 09 46 91 82 85 02 09 02
75 08 95 3F 81 03 85 81 09 03 75 08 95 3F 91 83
C0
Code: Select all
ID device address = 1, instance = 0 is mounted
HID Interface Protocol = None VID = 2DC8 PID = 3207
HID has 1 reports
VID = 2dc8, PID = 3207
Protocol 0
HID receive desc report:
06 A0 FF 09 01 A1 01 15 00 26 FF 00 19 01 29 02
75 08 95 40 81 02 15 00 26 FF 00 19 01 29 02 75
08 95 40 91 02 C0
HID device address = 2, instance = 0 is mounted
HID Interface Protocol = None VID = 2DC8 PID = 3207
HID has 1 reports
VID = 2dc8, PID = 3207
Protocol 0
HID receive desc report:
06 A0 FF 09 01 A1 01 15 00 26 FF 00 19 01 29 02
75 08 95 40 81 02 15 00 26 FF 00 19 01 29 02 75
08 95 40 91 02 C0
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0HID device address = 1, instance = 0 is unmounted
HID device address = 2, instance = 0 is unmounted
HID device address = 1, instance = 0 is mounted
HID Interface Protocol = None VID = 045E PID = 028E
HID has 0 reports
VID = 045e, PID = 028e
Protocol 0
HID receive desc report:
HID device address = 1, instance = 1 is mounted
HID Interface Protocol = None VID = 045E PID = 028E
HID has 0 reports
VID = 045e, PID = 028e
Protocol 0
HID receive desc report:
HID device address = 1, instance = 2 is mounted
HID Interface Protocol = None VID = 045E PID = 028E
HID has 0 reports
VID = 045e, PID = 028e
Protocol 0
HID receive desc report:I'm afraid you want the impossible, it is worth understanding that modern mice (especially gaming ones) have a very high optical sensor resolution (DPI) the difference in the number of DPI is very noticeable on a PC, but do not forget that DC had a ball mouse with a low resolution. I can't programmatically determine the mouse resolution, the user himself must understand the capabilities of DreamCast and choose the appropriate mouse, 600-1200 dpi is quite enough