Dreamcast-Talk.com

megavolt85 wrote: ↑Fri Dec 13, 2024 1:43 pm

cignus wrote: ↑Fri Dec 13, 2024 10:58 am Which ultimately did NOT work, still unsure as to why, I might give it another shot with the other adapter cables I purchased but the controller wasn't getting power.

yes, this board was designed by some idiot, but there is a solution, you need connect power to Vin and short two pins on diode
image_2.png

Amazing! How did you know that? Have you worked with this board before?

yes, i have one such board, so when i was first contacted about the problem, i looked at the board and saw that it was impossible to supply power to the type-c because of the diode, after that another user contacted me with the same problem, but this time i had a ready-made solution

cignus wrote: ↑Fri Dec 13, 2024 2:45 pm

megavolt85 wrote: ↑Fri Dec 13, 2024 2:39 pm I marked with a red stripe which two legs need to be shorted.

Idk how I missed that, I'll give it a shot this weekend

@pcwzrd13 Did a 3D enclosure for the Waveshare 2040 Zero board:
https://www.printables.com/model/840316 ... egav/files

So after messing with this a little more, I cannot for the life of me get my GP2040-CE flatbox to be recognized... is there something blatantly obvious I'm missing here? I had it working the other day!

Edit: I got it working in PS3 mode perfectly, I might have a short somewhere in my soldering because I took it out of the 3d printed case and it started working

Edit2: the Mayflash F500 also seems to work well with the adapter!

So, I added a screen to my adapter, which is amazing. I plan to make an enclosure 3d with screen support, but I need to learn how.

Thank you @megavolt85



https://www.youtube.com/shorts/WXiKysxqmaE

fabio14789 wrote: ↑Mon Dec 02, 2024 9:06 pm Does anyone have firmware for the Raspberry Pico to work with the Dreamcast joystick on Windows 10?

I've seen that in this forum, both members and developers don't care much about helping or answering questions... they forget any question that is asked.
There's a lot of arrogance or laziness in helping here.

fabio14789 wrote: ↑Mon Dec 30, 2024 10:31 am

fabio14789 wrote: ↑Mon Dec 02, 2024 9:06 pm Does anyone have firmware for the Raspberry Pico to work with the Dreamcast joystick on Windows 10?

I've seen that in this forum, both members and developers don't care much about helping or answering questions... they forget any question that is asked.
There's a lot of arrogance or laziness in helping here.

I think that you should open a new thread for this question, the focus of this thread is use any USB joypad on Dreamcast.
I never see what you want in this forum, but maybe exists on another.

fabio14789 wrote: ↑Mon Dec 30, 2024 10:31 am I've seen that in this forum, both members and developers don't care much about helping or answering questions...

your question is simply offtopic.
honestly I don't understand your complaint, if someone had firmware for such a device, I think you would have been answered, but since your question remained unanswered, either no one knows about such a device, or it simply does not exist.
if you asked about an adapter for connecting DC controllers to a PC, I would have sent you to Aliexpress, but you asked about firmware for RP2040, I have not seen such projects

megavolt85 wrote: ↑Wed Oct 30, 2024 7:03 pm I remembered that I was asked for this necessary function, now if you turn off the adapter on a running game and connect it back, then the last vmu turned on will boot
usb4maple(31.10.24).7z

Hey @megavolt85, in this version of GTA 3, the right Stick doesn't work, same changing to Guid + X mode on the Xbox 360 Wireless controller. Mr @jhone tested the preview firmware version and the right stick works perfectly without changing mode.

without changing mode right stick work as d-pad