Dreamcast-Talk.com

disconnect the telephone wire from the modem and try again

IT WORKED. IT FINALLY WORKS. I just got connected to the dreamcast and it worked!

there may be problems in games that require dial tone
look in the script window, is the error still there?

Yes there is, unfortunately. So far, DreamKey, PSOv2, and Quake 3 work.

there is a chance that your modem supports the AT+VSM=0.8000 command and after an error on the AT+VSM=1.8000 command it continues to work normally

megavolt85 premium support luck on u


Days ago I helped a french guy with same modem. He needed a firmware update. Did not support fclass=8 (voice) until that.

But your modem supported without firmware update. Maybe USRobotics is doing the homework.

The VSM error is not a problem, if works , is because the VSM default value is enough

Then hopefully we could all start compiling the modems that do work and with what setup. This one clearly didn't work with the raspberry pi setup, but it did with the VM setup.

Should work on pi

It didn't when I attempted, as noted in that long list.