USB4MAPLE adapter

[Johne]

Hi guys, hope all are fine.
Here is my little project 3d printing enclosure for display 1306 to attach to the joypad. The first prototype was created for Xbox 360 Wireless pad, but i plan to create it for PS4, Dual Sense, too.

20250120_074422.jpg
20250120_074413.jpg
20250120_002833.jpg
20250120_002813.jpg
20250120_002809.jpg
20250120_002804.jpg
20250120_002749.jpg

Professional skills!

[rpf16rj]

I think I understand what you're talking about, the thing is that for compatibility with all the original games, the sensitivity of the right stick was reduced by six times

Hey @megavol85, can you generate an FW version with display OLED support but without reducing the sensitivity of the right stick and without a feature that keeps the same vmu.bin when the power is off?

[at2ecw]

I would love to try this on mine when i get it in a few weeks!

[IMACOMPUTA]

Hi,
I hope I'm doing this right, but here is a log from the 8bitdo Ultimate 2C

Code: Select all

ID device address = 1, instance = 0 is mounted
HID Interface Protocol = None VID = 2DC8 PID = 301C
HID has 1 reports
VID = 2dc8, PID = 301c
Protocol 0
HID receive desc report:
06 A0 FF 09 01 A1 01 85 02 15 00 26 FF 00 19 01
29 02 75 08 95 3F 81 02 85 81 15 00 26 FF 00 19
01 29 02 75 08 95 3F 91 02 C0
HID device address = 1, instance = 0 is unmounted
HID device address = 1, instance = 0 is mounted
HID Interface Protocol = None VID = 2DC8 PID = 301C
HID has 1 reports
VID = 2dc8, PID = 301c
Protocol 0
HID receive desc report:
05 01 09 05 A1 01 85 01 15 00 25 01 35 00 45 01
75 01 95 0F 05 09 19 01 29 0F 81 02 95 01 81 01
05 01 25 07 46 3B 01 75 04 95 01 65 14 09 39 81
42 65 00 95 01 81 01 26 FF 00 46 FF 00 09 30 09
31 09 32 09 35 75 08 95 04 81 02 05 02 15 00 26
FF 00 09 C4 09 C5 95 02 75 08 81 02 05 08 09 43
15 00 26 FF 00 35 00 46 FF 00 75 08 95 02 91 82
09 44 91 82 09 45 91 82 09 46 91 82 85 02 09 02
75 08 95 3F 81 03 85 81 09 03 75 08 95 3F 91 83
C0

And
8bitdo Arcade Stick for Switch & Windows

Code: Select all

ID device address = 1, instance = 0 is mounted
HID Interface Protocol = None VID = 2DC8 PID = 3207
HID has 1 reports
VID = 2dc8, PID = 3207
Protocol 0
HID receive desc report:
06 A0 FF 09 01 A1 01 15 00 26 FF 00 19 01 29 02
75 08 95 40 81 02 15 00 26 FF 00 19 01 29 02 75
08 95 40 91 02 C0
HID device address = 2, instance = 0 is mounted
HID Interface Protocol = None VID = 2DC8 PID = 3207
HID has 1 reports
VID = 2dc8, PID = 3207
Protocol 0
HID receive desc report:
06 A0 FF 09 01 A1 01 15 00 26 FF 00 19 01 29 02
75 08 95 40 81 02 15 00 26 FF 00 19 01 29 02 75
08 95 40 91 02 C0
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0HID device address = 1, instance = 0 is unmounted
HID device address = 2, instance = 0 is unmounted
HID device address = 1, instance = 0 is mounted
HID Interface Protocol = None VID = 045E PID = 028E
HID has 0 reports
VID = 045e, PID = 028e
Protocol 0
HID receive desc report:
HID device address = 1, instance = 1 is mounted
HID Interface Protocol = None VID = 045E PID = 028E
HID has 0 reports
VID = 045e, PID = 028e
Protocol 0
HID receive desc report:
HID device address = 1, instance = 2 is mounted
HID Interface Protocol = None VID = 045E PID = 028E
HID has 0 reports
VID = 045e, PID = 028e
Protocol 0
HID receive desc report:

If these are insufficient, I'd really appreciate any advice on getting good logs. I have quite a few different controllers that I wouldn't mind contributing logs from.
Thanks!

[Ownski]

Does this support a USB hub where I could connect a USB keyboard and mouse utilizing one adapter?

[deluxux]

Does this support a USB hub where I could connect a USB keyboard and mouse utilizing one adapter?

No it only supports 1 device and 1 FlashDrive per USB4MAPLE

[Ownski]

So I received my adapter that I bought off eBay. I tried it real quick with a USB laser mouse I had laying around. When I tried to play half-life, the sensitivity was way too high and my weapon select kept on cycling. Has anyone ran into this problem before or is there additional setup required? I'm going to try another mouse when I get home from work.

[Ownski]

I tried updating the firmware and still had the same problem. I tried an old Microsoft mouse I had laying around and it ended up working fine. So it looks like the adapter isn't universal like I thought. I'm guessing each brand/make of mouse has different values that need to be programmed into the adapter.

[megavolt85]

I'm guessing each brand/make of mouse has different values that need to be programmed into the adapter.

I'm afraid you want the impossible, it is worth understanding that modern mice (especially gaming ones) have a very high optical sensor resolution (DPI) the difference in the number of DPI is very noticeable on a PC, but do not forget that DC had a ball mouse with a low resolution. I can't programmatically determine the mouse resolution, the user himself must understand the capabilities of DreamCast and choose the appropriate mouse, 600-1200 dpi is quite enough

[Ownski]

I'm not even talking about the resolution/DPI, the overall functionality didn't work. I tried a new OEM Dell mouse and only the horizontal axis worked, another mouse worked but would trigger the scroll wheel anytime you moved it.