Ok, added.
USB4MAPLE adapter
Moderators: pcwzrd13, deluxux, VasiliyRS
- pcwzrd13
- Seen Any Sailors?
- Posts: 7123
- Dreamcast Games you play Online: All of them! I'm able to connect with dial-up or broadband.
- Location: USA
- Contact:
Re: USB4MAPLE adapter
PSO Characters:
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
- MoeFoh
- Outrun
- Posts: 1136
Re: USB4MAPLE adapter
@pcwzrd13
I'm wondering if adding a wireless knockoff 360 controller to the Wiki would help some people out?
https://www.amazon.com/Replacement-Xbox ... 0CPLPMC93/
It has performed above & beyond my expectation. Quality is quite good. Full support, including rumble. Just plug in the receiver and go. Also works with the WingmanSD.
I'm wondering if adding a wireless knockoff 360 controller to the Wiki would help some people out?
https://www.amazon.com/Replacement-Xbox ... 0CPLPMC93/
It has performed above & beyond my expectation. Quality is quite good. Full support, including rumble. Just plug in the receiver and go. Also works with the WingmanSD.
- pcwzrd13
- Seen Any Sailors?
- Posts: 7123
- Dreamcast Games you play Online: All of them! I'm able to connect with dial-up or broadband.
- Location: USA
- Contact:
Re: USB4MAPLE adapter
AddedMoeFoh wrote: ↑Tue Apr 30, 2024 11:06 am @pcwzrd13
I'm wondering if adding a wireless knockoff 360 controller to the Wiki would help some people out?
https://www.amazon.com/Replacement-Xbox ... 0CPLPMC93/
PSO Characters:
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
- MoeFoh
- Outrun
- Posts: 1136
Re: USB4MAPLE adapter
@pcwzrd13
Nice work on the Wiki page - this will help a lot of people out.
@megavolt85
Maybe add the Wiki link to post #1?
Nice work on the Wiki page - this will help a lot of people out.
@megavolt85
Maybe add the Wiki link to post #1?
- MoeFoh
- Outrun
- Posts: 1136
Re: USB4MAPLE adapter
8bitdo M30 Configuration (Wired Mode):
I think I got it figured out.
D-input mode (controller off, turn on with start + b, plug in cable) (super important)
D-pad mode (select + up for 5 seconds)
Gamepad does not have any rumble motors.
We now have 2 new modes for a total of 6.
New: Arcade Stick mode (home + z), supports buttons a through z, lb = z rb = c
New: ASCII Pad FT mode (home + c), button layout is same as above
Twin Stick mode (home + y) layout:
- first stick
d-pad
- second stick
y = up
a = down
x = left
b = right
select = d (pause)
lb = face button x
rb = face button a
z = face button y
c = face button b
Amazon (US): https://www.amazon.com/8BitDo-Bluetooth ... 08FSGT34S/
Manual: https://download.8bitdo.com/Manual/Cont ... f?20220513
I think I got it figured out.
D-input mode (controller off, turn on with start + b, plug in cable) (super important)
D-pad mode (select + up for 5 seconds)
Gamepad does not have any rumble motors.
We now have 2 new modes for a total of 6.
New: Arcade Stick mode (home + z), supports buttons a through z, lb = z rb = c
New: ASCII Pad FT mode (home + c), button layout is same as above
Twin Stick mode (home + y) layout:
- first stick
d-pad
- second stick
y = up
a = down
x = left
b = right
select = d (pause)
lb = face button x
rb = face button a
z = face button y
c = face button b
Amazon (US): https://www.amazon.com/8BitDo-Bluetooth ... 08FSGT34S/
Manual: https://download.8bitdo.com/Manual/Cont ... f?20220513
Last edited by MoeFoh on Wed May 01, 2024 5:38 am, edited 3 times in total.
- MoeFoh
- Outrun
- Posts: 1136
Re: USB4MAPLE adapter
@megavolt85
I have an 8bitdo Pro 2 controller (a powerhouse of controllers).
I put it in d-input mode and made a log file. Didn't work in x-input mode (wired xbox 360 emulation).
What else do I need to do so you can update the firmware for support?
It says 1 HID report - is there debug firmware I should install? Manual: https://download.8bitdo.com/Manual/Cont ... f?20231201
I have an 8bitdo Pro 2 controller (a powerhouse of controllers).
I put it in d-input mode and made a log file. Didn't work in x-input mode (wired xbox 360 emulation).
What else do I need to do so you can update the firmware for support?
It says 1 HID report - is there debug firmware I should install? Manual: https://download.8bitdo.com/Manual/Cont ... f?20231201
- MoeFoh
- Outrun
- Posts: 1136
Re: USB4MAPLE adapter
pro2 debug report: