USB4MAPLE adapter

[megavolt85]

No markings on the stick so just noted the DC arcade stick layout in the log

GC2USB (VID 057E PID 0337) hot key START+Z, don't have Twin Stick mode, controller have big dead zone for triggers
Astrocity (VID 0CA3 PID 0028)

usb4maple(GC2USB, Astocity).7z

(49.09 KiB) Downloaded 13 times

[maonaluva]

8bitdo SNES30 Wireless Bluetooth Controller
https://www.amazon.com/Wireless-Bluetoo ... ref=sr_1_6

Code: Select all

Starting
HID device address = 1, instance = 0 is mounted
HID Interface Protocol = None VID = 1235 PID = AB20
HID has 1 reports
VID = 1235, PID = ab20
Protocol 0
HID receive desc report:
05 01 09 04 A1 01 A1 02 75 08 95 04 15 00 26 FF
00 35 00 46 FF 00 09 30 09 31 09 32 09 35 81 02
75 04 95 01 25 07 46 3B 01 65 14 09 39 81 42 65
00 75 01 95 0C 25 01 45 01 05 09 19 01 29 0C 81
02 06 00 FF 75 01 95 08 25 01 45 01 09 01 81 02
C0 A1 02 75 08 95 08 46 FF 00 26 FF 00 09 02 91
02 C0 C0
80 80 80 80 0F 00 00

d-pad up = 80 00 80 80 0F 00 00
d-pad down = 80 FF 80 80 0F 00 00
d-pad left = 00 80 80 80 0F 00 00
d-pad right = FF 80 80 80 0F 00 00

Y = 80 80 80 80 0F 01 00
X = 80 80 80 80 8F 00 00
B = 80 80 80 80 2F 00 00
A = 80 80 80 80 1F 00 00

L = 80 80 80 80 0F 04 00
R = 80 80 80 80 0F 08 00

start = 80 80 80 80 0F 80 00
select = 80 80 80 80 0F 40 00

[megavolt85]

8bitdo SNES30 Wireless Bluetooth Controller

usb4maple(8bitdo SNES30, PowerA Nintendo Switch ).7z

(49.5 KiB) Downloaded 20 times

[Vespa]

No markings on the stick so just noted the DC arcade stick layout in the log

GC2USB (VID 057E PID 0337) hot key START+Z, don't have Twin Stick mode, controller have big dead zone for triggers
Astrocity (VID 0CA3 PID 0028)
usb4maple(GC2USB, Astocity).7z

Thanks, Sega Astrocity stick is perfect.

GC2USB:
Looks like I messed up the notation on this!
-Up and down on the analog stick is currently inverted (up is down etc)
-Map GC 'B' to DC 'X'
-Map GC 'X' to DC 'B'
-I assume vibration can not be supported without the correct byte info?

Start+Z is the twin stick mode? that's cool, can't have everything! Is it possible to map something to the C-Stick, perhaps mirror the D-pad or the main analog stick? Thank you for your hard work.

[pomegd]

thanks megavolt85.
USB4MAPLE for NAOMI

[MoeFoh]

@megavolt85

Another one.
MAYFLASH F101 ARCADE STICK - D-INPUT

PuTTY.mayflash-f101-stick.debug.log.txt

(1.04 KiB) Downloaded 9 times

Switch = DINPUT/PS3 Position
Switch = DP Position (D-PAD output)

Info:
https://www.mayflash.com/product/mayfla ... _f101.html
Manual:
https://www.mayflash.com/manual/F101_User_Manual.html

[megavolt85]

Start+Z is the twin stick mode? that's cool, can't have everything! Is it possible to map something to the C-Stick, perhaps mirror the D-pad or the main analog stick? Thank you for your hard work.

fixed, added vibration test
hold Start+Z and click A or B or X. supported three modes: standart, all axes and FPS

MAYFLASH F101 ARCADE STICK - D-INPUT

added, test

usb4maple(fix GC2USB, MyFlash F101).7z

(49.54 KiB) Downloaded 12 times

[Vespa]

fixed, added vibration test
hold Start+Z and click A or B or X. supported three modes: standart, all axes and FPS

usb4maple(fix GC2USB, MyFlash F101).7z

-GC mapping FIXED. Thank you, the hotkey modes are excellent additions!
-The option to enable vibration is now available in game menus with this firmware, however it will not vibrate. If you plug in the second grey USB on the Mayflash adapter (for power) the controls will stop responding. The Dreamcast still reports/sees the pad as detected/active when this happens (no controller disconnected messages)

[sonik]

@Vespa using a usb hub to connect both usb cables?

[gatoh]

Attached is the Log of the Arcade Stick Mayflash F300 in PS3 Mode,and of de Razer Viper v2 Pro

ok, MyFlash F300 added
usb4maple(MyFlash F300).7z

but for mouse need more tests

BB 1? 2? WW X16 Y16
00 00 01 00 00 00 01 00
need check how changed walue "1?" and "2?" may be is 8 bit X and Y

Mayflash F300 works! but and with the 240p it detects it as Arcade Stick, but you have to remap some buttons:

A Ok!
B Ok!
R2 should C is Nothing
L2 should Nothing is X
X should X is Y
Y should Y is Z
R1 should Z is Nothing
L1 should Nothing is C

Regarding the mouse, I attach a video:

https://youtu.be/a2ppidVVuxI

Thank you!