Gens4All with Z80 Emulation

Place for discussing homebrew games, development, new releases and emulation.

Moderators: pcwzrd13, deluxux, VasiliyRS

User avatar
Ian Micheal
Developer
Posts: 5994
Contact:

Re: Gens4All with Z80 Emulation

Post#171 » Wed Jan 12, 2022 8:38 pm

TapamN wrote:
mrneo240 wrote:Don't feel afraid to reach out ;)
Could have saved you an hour
https://github.com/mrneo240/openmenu/blob/master/ui/dc/font_bmf.c

I hope to see sneak peeks or such on the game! Great to see you aren't leaving but rather refocusing into a single thing.

The timestamps on my backups for my BMFont code start in 2017. I guess I could've saved you an hour if I posted it. :P

I think I'm going to make a thread to post about progress. Having people interested should help motivate me.

Ian Micheal wrote:Problem only happens on rca leads like i said... It works perfect on vga since i dont use rca leads it's not a problem for me but users..
the emulator does not crash and you can go back to the menu there is no sound ether on rca leads when this happens, other games works fine just a few that do this.. The problem game as i said this happens on few others..

Huh. I guess the issue is probably with the emulator core, then. I have no idea how the cable type could cause that. If I manage to get my setup changed so that I can test on NTSC easier, I might go back and take a look at it.



debug loading the rom now

```

Code: Select all

OUTPUT:> Loading rom Phantasy Star GenIIII - Working Designs (v6.1).bin... At PC: 8C096366, PR: 8C096366
OUTPUT:> Z80 Clock 0
OUTPUT:> R0: 8C001AC0  R1: 00000010  R2: 00000000  R3: 8C0029C6 
OUTPUT:> R4: 00000000  R5: 00000000  R6: 00000000  R7: 00000798 
OUTPUT:> R8: 00000001  R9: 8C0000BC  R10: 0000013A  R11: 8C0AB168 
OUTPUT:> R12: 000007FF  R13: 00000800  R14: 00277214  R15: 8CFE66B8 
OUTPUT:> At PC: 8C096366, PR: 8C096366
OUTPUT:> kernel panic: Watchdog timeout
OUTPUT:> arch: aborting the system
STATE:> Upload processus completed on 1/12/2022 - 20:35:08, Exit Code : 0

```

Code: Select all

OUTPUT:> KallistiOS Git revision v2.0.0-489-gfae2358-dirty:
OUTPUT:>   Sun 26 Sep 2021 11:00:31 PM CDT
OUTPUT:>   alex@alex-ThinkPad-P15-Gen-1:/opt/toolchains/dc/kos
OUTPUT:> maple: active drivers:
OUTPUT:>     Dreameye (Camera): Camera
OUTPUT:>     Sound Input Peripheral: Microphone
OUTPUT:>     PuruPuru (Vibration) Pack: JumpPack
OUTPUT:>     VMU Driver: Clock, LCD, MemoryCard
OUTPUT:>     Mouse Driver: Mouse
OUTPUT:>     Keyboard Driver: Keyboard
OUTPUT:>     Controller Driver: Controller
OUTPUT:>     Lightgun: LightGun
OUTPUT:>   DMA Buffer at ac5f1120
OUTPUT:> vid_set_mode: 640x480 VGA
OUTPUT:> fs_romdisk: mounting image at 0x8c0cff6c at /rd
OUTPUT:> dc-load console support enabled
OUTPUT:> maple: attached devices:
OUTPUT:>   A0: Dreamcast Controller          (01000000: Controller)
OUTPUT:> MAIN !!!!
OUTPUT:> Init genesis bios
OUTPUT:> InitFont
OUTPUT:> Reset variables
OUTPUT:> Init CPUs
OUTPUT:> Load config
OUTPUT:> Load_Config './/gens.cfg'
OUTPUT:> vid_set_mode: 320x240 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Main loop
OUTPUT:> Sound Rate   : 22050
OUTPUT:> Sound Enabled: 1
OUTPUT:> DAC Enabled  : 1
OUTPUT:> Z80 State    : 1
OUTPUT:> CCR: 00000105
OUTPUT:> RD: 64
OUTPUT:> vid_set_mode: 640x480 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 3420
OUTPUT:> Texmode: 2
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 252
OUTPUT:> fs_iso9660: disc change detected
OUTPUT:>   (joliet level 3 extensions detected)
OUTPUT:> vid_set_mode: 320x240 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Loading rom Phantasy Star GenIIII - Working Designs (v6.1).bin... At PC: 8C096366, PR: 8C096366
OUTPUT:> Z80 Clock 0
OUTPUT:> R0: 8C001AC0  R1: 00000010  R2: 00000000  R3: 8C0029C6 
OUTPUT:> R4: 00000000  R5: 00000000  R6: 00000000  R7: 00000798 
OUTPUT:> R8: 00000001  R9: 8C0000BC  R10: 0000013A  R11: 8C0AB168 
OUTPUT:> R12: 000007FF  R13: 00000800  R14: 00277214  R15: 8CFE66B8 
OUTPUT:> At PC: 8C096366, PR: 8C096366
OUTPUT:> kernel panic: Watchdog timeout
OUTPUT:> arch: aborting the system
STATE:> Upload processus completed on 1/12/2022 - 20:35:08, Exit Code : 0


now this is what happens yet it worked the other day and i made a video on hardware never had this type of thing before where it worked now it does this every time

TapamN
letterbomb
Posts: 149

Re: Gens4All with Z80 Emulation

Post#172 » Thu Jan 13, 2022 6:33 am

Ian Micheal wrote:

Code: Select all

OUTPUT:> KallistiOS Git revision v2.0.0-489-gfae2358-dirty:
OUTPUT:>   Sun 26 Sep 2021 11:00:31 PM CDT
OUTPUT:>   alex@alex-ThinkPad-P15-Gen-1:/opt/toolchains/dc/kos
OUTPUT:> maple: active drivers:
OUTPUT:>     Dreameye (Camera): Camera
OUTPUT:>     Sound Input Peripheral: Microphone
OUTPUT:>     PuruPuru (Vibration) Pack: JumpPack
OUTPUT:>     VMU Driver: Clock, LCD, MemoryCard
OUTPUT:>     Mouse Driver: Mouse
OUTPUT:>     Keyboard Driver: Keyboard
OUTPUT:>     Controller Driver: Controller
OUTPUT:>     Lightgun: LightGun
OUTPUT:>   DMA Buffer at ac5f1120
OUTPUT:> vid_set_mode: 640x480 VGA
OUTPUT:> fs_romdisk: mounting image at 0x8c0cff6c at /rd
OUTPUT:> dc-load console support enabled
OUTPUT:> maple: attached devices:
OUTPUT:>   A0: Dreamcast Controller          (01000000: Controller)
OUTPUT:> MAIN !!!!
OUTPUT:> Init genesis bios
OUTPUT:> InitFont
OUTPUT:> Reset variables
OUTPUT:> Init CPUs
OUTPUT:> Load config
OUTPUT:> Load_Config './/gens.cfg'
OUTPUT:> vid_set_mode: 320x240 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Main loop
OUTPUT:> Sound Rate   : 22050
OUTPUT:> Sound Enabled: 1
OUTPUT:> DAC Enabled  : 1
OUTPUT:> Z80 State    : 1
OUTPUT:> CCR: 00000105
OUTPUT:> RD: 64
OUTPUT:> vid_set_mode: 640x480 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 3420
OUTPUT:> Texmode: 2
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 252
OUTPUT:> fs_iso9660: disc change detected
OUTPUT:>   (joliet level 3 extensions detected)
OUTPUT:> vid_set_mode: 320x240 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Loading rom Phantasy Star GenIIII - Working Designs (v6.1).bin... At PC: 8C096366, PR: 8C096366
OUTPUT:> Z80 Clock 0
OUTPUT:> R0: 8C001AC0  R1: 00000010  R2: 00000000  R3: 8C0029C6 
OUTPUT:> R4: 00000000  R5: 00000000  R6: 00000000  R7: 00000798 
OUTPUT:> R8: 00000001  R9: 8C0000BC  R10: 0000013A  R11: 8C0AB168 
OUTPUT:> R12: 000007FF  R13: 00000800  R14: 00277214  R15: 8CFE66B8 
OUTPUT:> At PC: 8C096366, PR: 8C096366
OUTPUT:> kernel panic: Watchdog timeout
OUTPUT:> arch: aborting the system
STATE:> Upload processus completed on 1/12/2022 - 20:35:08, Exit Code : 0


now this is what happens yet it worked the other day and i made a video on hardware never had this type of thing before where it worked now it does this every time


It looks like the watchdog is timing out while loading the ROM? I thought I paused the watchdog while loading?

Er, I can't find the pause call, so I guess not? I'm surprised people could load larger ROMs at all from disc.

Here's a quick version 4.2, which pauses the watchdog when loading ROMs. I didn't include the full source, just the single file modified file compared to version 4.1.
Attachments
gens4all_v4_2.7z
(337.16 KiB) Downloaded 162 times

User avatar
Ian Micheal
Developer
Posts: 5994
Contact:

Re: Gens4All with Z80 Emulation

Post#173 » Thu Jan 13, 2022 11:16 am

TapamN wrote:
Ian Micheal wrote:

Code: Select all

OUTPUT:> KallistiOS Git revision v2.0.0-489-gfae2358-dirty:
OUTPUT:>   Sun 26 Sep 2021 11:00:31 PM CDT
OUTPUT:>   alex@alex-ThinkPad-P15-Gen-1:/opt/toolchains/dc/kos
OUTPUT:> maple: active drivers:
OUTPUT:>     Dreameye (Camera): Camera
OUTPUT:>     Sound Input Peripheral: Microphone
OUTPUT:>     PuruPuru (Vibration) Pack: JumpPack
OUTPUT:>     VMU Driver: Clock, LCD, MemoryCard
OUTPUT:>     Mouse Driver: Mouse
OUTPUT:>     Keyboard Driver: Keyboard
OUTPUT:>     Controller Driver: Controller
OUTPUT:>     Lightgun: LightGun
OUTPUT:>   DMA Buffer at ac5f1120
OUTPUT:> vid_set_mode: 640x480 VGA
OUTPUT:> fs_romdisk: mounting image at 0x8c0cff6c at /rd
OUTPUT:> dc-load console support enabled
OUTPUT:> maple: attached devices:
OUTPUT:>   A0: Dreamcast Controller          (01000000: Controller)
OUTPUT:> MAIN !!!!
OUTPUT:> Init genesis bios
OUTPUT:> InitFont
OUTPUT:> Reset variables
OUTPUT:> Init CPUs
OUTPUT:> Load config
OUTPUT:> Load_Config './/gens.cfg'
OUTPUT:> vid_set_mode: 320x240 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Main loop
OUTPUT:> Sound Rate   : 22050
OUTPUT:> Sound Enabled: 1
OUTPUT:> DAC Enabled  : 1
OUTPUT:> Z80 State    : 1
OUTPUT:> CCR: 00000105
OUTPUT:> RD: 64
OUTPUT:> vid_set_mode: 640x480 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 3420
OUTPUT:> Texmode: 2
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 252
OUTPUT:> fs_iso9660: disc change detected
OUTPUT:>   (joliet level 3 extensions detected)
OUTPUT:> vid_set_mode: 320x240 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Loading rom Phantasy Star GenIIII - Working Designs (v6.1).bin... At PC: 8C096366, PR: 8C096366
OUTPUT:> Z80 Clock 0
OUTPUT:> R0: 8C001AC0  R1: 00000010  R2: 00000000  R3: 8C0029C6 
OUTPUT:> R4: 00000000  R5: 00000000  R6: 00000000  R7: 00000798 
OUTPUT:> R8: 00000001  R9: 8C0000BC  R10: 0000013A  R11: 8C0AB168 
OUTPUT:> R12: 000007FF  R13: 00000800  R14: 00277214  R15: 8CFE66B8 
OUTPUT:> At PC: 8C096366, PR: 8C096366
OUTPUT:> kernel panic: Watchdog timeout
OUTPUT:> arch: aborting the system
STATE:> Upload processus completed on 1/12/2022 - 20:35:08, Exit Code : 0


now this is what happens yet it worked the other day and i made a video on hardware never had this type of thing before where it worked now it does this every time


It looks like the watchdog is timing out while loading the ROM? I thought I paused the watchdog while loading?

Er, I can't find the pause call, so I guess not? I'm surprised people could load larger ROMs at all from disc.

Here's a quick version 4.2, which pauses the watchdog when loading ROMs. I didn't include the full source, just the single file modified file compared to version 4.1.


Well that explains it how one time i got lucky and it just worked thank you TapanM

User avatar
Ian Micheal
Developer
Posts: 5994
Contact:

Re: Gens4All with Z80 Emulation

Post#174 » Thu Jan 13, 2022 12:56 pm

TapamN wrote:
Ian Micheal wrote:

Code: Select all

OUTPUT:> KallistiOS Git revision v2.0.0-489-gfae2358-dirty:
OUTPUT:>   Sun 26 Sep 2021 11:00:31 PM CDT
OUTPUT:>   alex@alex-ThinkPad-P15-Gen-1:/opt/toolchains/dc/kos
OUTPUT:> maple: active drivers:
OUTPUT:>     Dreameye (Camera): Camera
OUTPUT:>     Sound Input Peripheral: Microphone
OUTPUT:>     PuruPuru (Vibration) Pack: JumpPack
OUTPUT:>     VMU Driver: Clock, LCD, MemoryCard
OUTPUT:>     Mouse Driver: Mouse
OUTPUT:>     Keyboard Driver: Keyboard
OUTPUT:>     Controller Driver: Controller
OUTPUT:>     Lightgun: LightGun
OUTPUT:>   DMA Buffer at ac5f1120
OUTPUT:> vid_set_mode: 640x480 VGA
OUTPUT:> fs_romdisk: mounting image at 0x8c0cff6c at /rd
OUTPUT:> dc-load console support enabled
OUTPUT:> maple: attached devices:
OUTPUT:>   A0: Dreamcast Controller          (01000000: Controller)
OUTPUT:> MAIN !!!!
OUTPUT:> Init genesis bios
OUTPUT:> InitFont
OUTPUT:> Reset variables
OUTPUT:> Init CPUs
OUTPUT:> Load config
OUTPUT:> Load_Config './/gens.cfg'
OUTPUT:> vid_set_mode: 320x240 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Main loop
OUTPUT:> Sound Rate   : 22050
OUTPUT:> Sound Enabled: 1
OUTPUT:> DAC Enabled  : 1
OUTPUT:> Z80 State    : 1
OUTPUT:> CCR: 00000105
OUTPUT:> RD: 64
OUTPUT:> vid_set_mode: 640x480 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 3420
OUTPUT:> Texmode: 2
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 252
OUTPUT:> fs_iso9660: disc change detected
OUTPUT:>   (joliet level 3 extensions detected)
OUTPUT:> vid_set_mode: 320x240 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Loading rom Phantasy Star GenIIII - Working Designs (v6.1).bin... At PC: 8C096366, PR: 8C096366
OUTPUT:> Z80 Clock 0
OUTPUT:> R0: 8C001AC0  R1: 00000010  R2: 00000000  R3: 8C0029C6 
OUTPUT:> R4: 00000000  R5: 00000000  R6: 00000000  R7: 00000798 
OUTPUT:> R8: 00000001  R9: 8C0000BC  R10: 0000013A  R11: 8C0AB168 
OUTPUT:> R12: 000007FF  R13: 00000800  R14: 00277214  R15: 8CFE66B8 
OUTPUT:> At PC: 8C096366, PR: 8C096366
OUTPUT:> kernel panic: Watchdog timeout
OUTPUT:> arch: aborting the system



STATE:> Upload processus completed on 1/12/2022 - 20:35:08, Exit Code : 0


now this is what happens yet it worked the other day and i made a video on hardware never had this type of thing before where it worked now it does this every time


It looks like the watchdog is timing out while loading the ROM? I thought I paused the watchdog while loading?

Er, I can't find the pause call, so I guess not? I'm surprised people could load larger ROMs at all from disc.

Here's a quick version 4.2, which pauses the watchdog when loading ROMs. I didn't include the full source, just the single file modified file compared to version 4.1.

Code: Select all


New version
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Loading rom Phantasy Star GenIIII - Working Designs (v6.1).bin... At PC: 8C096386, PR: 8C096386
OUTPUT:> Z80 Clock 59738
OUTPUT:> R0: 000000A0  R1: 00004A58  R2: A05F7000  R3: 00000378 
OUTPUT:> R4: 8C5FFA04  R5: 00000000  R6: 00000094  R7: 00000798 
OUTPUT:> R8: 00000001  R9: 8C0000BC  R10: 000002B4  R11: 8C0AB188 
OUTPUT:> R12: 000007FF  R13: 00000800  R14: 00279A14  R15: 8CFE66B8 
OUTPUT:> At PC: 8C096386, PR: 8C096386
OUTPUT:> Z80 Clock 59738
OUTPUT:> R0: 8C001A7C  R1: 00000010  R2: 0000000B  R3: 00000003 
OUTPUT:> R4: 00000000  R5: 00000000  R6: 00000000  R7: 00000798 
OUTPUT:> R8: 00000001  R9: 8C0000BC  R10: 0000066C  R11: 8C0AB188 
OUTPUT:> R12: 000007FF  R13: 00000800  R14: 0009DA14  R15: 8CFE66B8 
OUTPUT:> kernel panic: Watchdog timeout
OUTPUT:> arch: aborting the system
STATE:> Upload processus completed on 1/13/2022 - 12:48:45, Exit Code : 0


Seems the same problem but it did almost work

User avatar
Ian Micheal
Developer
Posts: 5994
Contact:

Re: Gens4All with Z80 Emulation

Post#175 » Thu Jan 13, 2022 1:05 pm

works from loading from serial btw

Code: Select all

OUTPUT:> KallistiOS Git revision v2.0.0-489-gfae2358-dirty:
OUTPUT:>   Sun 26 Sep 2021 11:00:31 PM CDT
OUTPUT:>   alex@alex-ThinkPad-P15-Gen-1:/opt/toolchains/dc/kos
OUTPUT:> maple: active drivers:
OUTPUT:>     Dreameye (Camera): Camera
OUTPUT:>     Sound Input Peripheral: Microphone
OUTPUT:>     PuruPuru (Vibration) Pack: JumpPack
OUTPUT:>     VMU Driver: Clock, LCD, MemoryCard
OUTPUT:>     Mouse Driver: Mouse
OUTPUT:>     Keyboard Driver: Keyboard
OUTPUT:>     Controller Driver: Controller
OUTPUT:>     Lightgun: LightGun
OUTPUT:>   DMA Buffer at ac5f1140
OUTPUT:> vid_set_mode: 640x480 VGA
OUTPUT:> fs_romdisk: mounting image at 0x8c0cff8c at /rd
OUTPUT:> dc-load console support enabled
OUTPUT:> maple: attached devices:
OUTPUT:>   A0: Dreamcast Controller          (01000000: Controller)
OUTPUT:> MAIN !!!!
OUTPUT:> Init genesis bios
OUTPUT:> InitFont
OUTPUT:> Reset variables
OUTPUT:> Init CPUs
OUTPUT:> Load config
OUTPUT:> Load_Config './/gens.cfg'
OUTPUT:> vid_set_mode: 320x240 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Main loop
OUTPUT:> Sound Rate   : 22050
OUTPUT:> Sound Enabled: 1
OUTPUT:> DAC Enabled  : 1
OUTPUT:> Z80 State    : 1
OUTPUT:> CCR: 00000105
OUTPUT:> RD: 64
OUTPUT:> vid_set_mode: 640x480 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 3420
OUTPUT:> Texmode: 2
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 252
OUTPUT:> fs_iso9660: disc change detected
OUTPUT:>   (joliet level 3 extensions detected)
OUTPUT:> vid_set_mode: 320x240 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Loading rom Phantasy Star GenIIII.bin... done.
OUTPUT:> ***LOADING SRAM***
OUTPUT:> /ram/GENS4ALL_QhD
OUTPUT:> Init_Genesis: Sound_Enable is 1
OUTPUT:> Initing_Sound
OUTPUT:> Sound Rate: 22050
OUTPUT:> Audiobuf size: 32768
OUTPUT:> Name : "PHANTASY STAR The end of the millennium "
OUTPUT:> NameW: "PHANTASY STAR The end of the millennium "
OUTPUT:> Version: " MK-1307 -00"
OUTPUT:> Sonic Z80: 0
OUTPUT:> Sonic 2: 0
OUTPUT:> Ristar: 0
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 3420


No problem with the core loading the game it's just from a cdr
Attachments
bandicam 2022-01-13 13-05-15-948.jpg
bandicam 2022-01-13 13-03-58-449.jpg

TapamN
letterbomb
Posts: 149

Re: Gens4All with Z80 Emulation

Post#176 » Thu Jan 13, 2022 3:40 pm

It seems like it's still getting stuck in cdrom_exec_cmd somehow. Alright, here's a version with the watchdog disabled. It will probably end up just freezing.
Attachments
gens4all_v4_2_no_wd.7z
(333.04 KiB) Downloaded 148 times

User avatar
Ian Micheal
Developer
Posts: 5994
Contact:

Re: Gens4All with Z80 Emulation

Post#177 » Thu Jan 13, 2022 4:48 pm

TapamN wrote:It seems like it's still getting stuck in cdrom_exec_cmd somehow. Alright, here's a version with the watchdog disabled. It will probably end up just freezing.


New version still did this but again works from loading the rom f/pc with a coders cable ?

Code: Select all

OUTPUT:> Texmode: 2
OUTPUT:> Texmode: 2
OUTPUT:> chars size: 252
OUTPUT:> fs_iso9660: disc change detected
OUTPUT:>   (joliet level 3 extensions detected)
OUTPUT:> vid_set_mode: 320x240 VGA
OUTPUT:> pvr: disabling vertical scaling for VGA
OUTPUT:> Loading rom Phantasy Star GenIIII - Working Designs (v6.1).bin... At PC: 8C0963A6, PR: 8C0963A6
OUTPUT:> Z80 Clock 0
OUTPUT:> R0: 8C001000  R1: FFFFB9E5  R2: A05F7080  R3: 000002D8 
OUTPUT:> R4: 00000000  R5: 00000000  R6: 00000000  R7: 00000002 
OUTPUT:> R8: 00000001  R9: 8C0000BC  R10: 0000012D  R11: 8C0AB1A8 
OUTPUT:> R12: 000007FF  R13: 00000800  R14: 0027DA14  R15: 8CFE66B8 
OUTPUT:> At PC: 8C0963A6, PR: 8C0963A6
OUTPUT:> Z80 Clock 0
OUTPUT:> R0: 8C001A98  R1: 00000013  R2: 00000010  R3: 00000001 
OUTPUT:> R4: 000004F8  R5: FFFFF904  R6: 00000000  R7: 00000798 
OUTPUT:> R8: 00000001  R9: 8C0000BC  R10: 000004D8  R11: 8C0AB1A8 
OUTPUT:> R12: 000007FF  R13: 00000800  R14: 000A8214  R15: 8CFE66B8 
OUTPUT:> kernel panic: Watchdog timeout
OUTPUT:> arch: aborting the system
STATE:> Upload processus completed on 1/13/2022 - 16:46:57, Exit Code : 0


Still saying this OUTPUT:> kernel panic: Watchdog timeout for a cdr but works on GDEMU with out trouble ? Seek time? works on dreamshell as well.. Just not a cdr

TapamN
letterbomb
Posts: 149

Re: Gens4All with Z80 Emulation

Post#178 » Thu Jan 13, 2022 5:31 pm

Yeah, it occurred to me a couple minutes ago, even before I read your post, that I disabled it incorrectly. Here's attempt two. I even tested and infinite loop this time.

Actually, it looks like my attempt to disable it only during loads didn't work because I made the same mistake?
Attachments
gens4all_v4_2_no_wd2.7z
(332.84 KiB) Downloaded 144 times

User avatar
Ian Micheal
Developer
Posts: 5994
Contact:

Re: Gens4All with Z80 Emulation

Post#179 » Thu Jan 13, 2022 5:52 pm

TapamN wrote:Yeah, it occurred to me a couple minutes ago, even before I read your post, that I disabled it incorrectly. Here's attempt two. I even tested and infinite loop this time.

Actually, it looks like my attempt to disable it only during loads didn't work because I made the same mistake?


fixed now :) working loading from a cdr with this version well done :)

User avatar
MoeFoh
Uber
Posts: 1036

Re: Gens4All with Z80 Emulation

Post#180 » Thu Jan 13, 2022 6:05 pm

Ian Micheal wrote:
TapamN wrote:Yeah, it occurred to me a couple minutes ago, even before I read your post, that I disabled it incorrectly. Here's attempt two. I even tested and infinite loop this time.

Actually, it looks like my attempt to disable it only during loads didn't work because I made the same mistake?


fixed now :) working loading from a cdr with this version well done :)


I'll make a CDR version with this new binary w/ padding shortly. I'm also going to chop extra "_"'s off the filenames.

Get it here:
viewtopic.php?f=51&t=14933
Last edited by MoeFoh on Tue Jan 18, 2022 10:43 am, edited 2 times in total.
“The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence.”
- Charles Bukowski

  • Similar Topics
    Replies
    Views
    Last post

Return to “New Releases/Homebrew/Emulation”

Who is online

Users browsing this forum: No registered users