interesting thing seems to have happened if i have a VMU in my controller in port 1 (didn't test other ports) then my vmu emulator board in slot 4 shows up at boot and seems to be stable yet without a VMU in my controller it doesn't so yeah that's a thing lol any thoughts?
Roareye wrote:Hoping there'll be a physical release of this at some point. Megavolt85 is doing amazing work with this.
once the firmware is working 100% i will release the files for my board:
i also have a design for a controller adapter version.
Awesome. Will your version be able to access the extra maple functions like CDZ buttons and the right stick? That would be a must have at that point.
I look forward to when you release. How much would you be charging per unit?
all that stuff is on the firmware side so you'll have to speak to megavolt85 about that, as to my pcbs i will just be releasing the files so you can make your own. i don't have any experience selling and shipping stuff so i don't think i will be doing that but i did make the board pretty noob friendly so anyone should be fine putting it together, apart from the M25PE16 you can use through hole stuff for the rest and the 0 Ohm resistor spot can just be bridged with solder. the 16v cap and 10uf mlcc spots are just optional.
edit: also just to clarify, the pcb you see above is only for vmu emulation and dumping:
Last edited by RazorX on Thu Jan 07, 2021 3:17 pm, edited 1 time in total.