@megavolt85
MAYFLASH F101 ARCADE STICK - D-INPUT
Perfect.
An nice entry-level budget arcade stick for around $40-$45 in the US. Highly recommended.
USB4MAPLE adapter
- Vespa
- undertow
- Posts: 27
Re: USB4MAPLE adapter
Just tried using a hub and same result, controls lock up until the grey usb lead is taken out, I also tried it with the hub being powered by a separate supply and that setup also exhibited the same issue (not sure this was safe, the DC fan was on even after power off, hub was powering it! O_O). It's not a big deal if vibration doesn't work, it's still an awesome option to have. I've got a Raphnet GC to USB adapter to dump which doesn't have this two lead USB setup so hopefully that will work fine with vibration. Thanks for your help!
- Vespa
- undertow
- Posts: 27
Re: USB4MAPLE adapter
Hori DOA4 Arcade Stick 360
My DOA4 stick was/is in the process of being modded so switches were all taken out of place, I have no idea what the directions are, originally I guessed based on this picture and where the colours are leading to but cross referencing with the Hori RAP stick log, where all other buttons match, this could be wrong. Does anybody else have this stick to confirm the directional inputs once the firmware is up?
They're currently matched to inputs based on the wire colours in this pic from an online guide:
- Attachments
-
- DOA4 stick_log.txt
- (1.49 KiB) Downloaded 11 times
- megavolt85
- Developer
- Posts: 1966
Re: USB4MAPLE adapter
i'm sure what for all x360 compatible isVespa wrote: ↑Fri May 10, 2024 4:30 pm My DOA4 stick was/is in the process of being modded so switches were all taken out of place, I have no idea what the directions are, originally I guessed based on this picture and where the colours are leading to but cross referencing with the Hori RAP stick log, where all other buttons match, this could be wrong. Does anybody else have this stick to confirm the directional inputs once the firmware is up?
Code: Select all
00 14 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Up
00 14 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Down
00 14 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Left
00 14 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Right
- gatoh
- shadow
- Posts: 8
Re: USB4MAPLE adapter
I think you have not attached the correct file, it does not work at all and has a modification date of April 20, 2024.megavolt85 wrote: ↑Fri May 10, 2024 2:57 pmtest mouse and F300usb4maple(test MyFlash F300, Viperv2Pro).7z
Is it correct?
Thank you!
- maonaluva
- undertow
- Posts: 27
Re: USB4MAPLE adapter
I just tested, the SNES30 had the X and Y inverted, and the A and B were also inverted.
The PowerA Nintendo Switch worked perfectly, I even tested the second analogue in Quake 3, everything was fine.
- robinhoodie
- undertow
- Posts: 27
Re: USB4MAPLE adapter
Tested the DOA 4 stick. It works perfectly. Thought it won't let me switch to other modes.
I want to add to the supported sticks list. What do I need to generate the log file?
I want to add to the supported sticks list. What do I need to generate the log file?
- Vespa
- undertow
- Posts: 27
Re: USB4MAPLE adapter
Thank you megavolt for adding the stick and robinhoodie for confirming it works. Are arcade sticks supposed to have alt modes?robinhoodie wrote: ↑Fri May 10, 2024 10:34 pm Tested the DOA 4 stick. It works perfectly. Thought it won't let me switch to other modes.
I want to add to the supported sticks list. What do I need to generate the log file?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 3731 Views
-
Last post by segalover08
-
- 2 Replies
- 3909 Views
-
Last post by RightSprite UK
-
- 3 Replies
- 4188 Views
-
Last post by mstar
-
- 390 Replies
- 236913 Views
-
Last post by megavolt85
-
- 6 Replies
- 5070 Views
-
Last post by Ian Micheal