Do you have an option called "Useable IP range"? Make sure thats not limited to xx.xx.xx.33-37. I'd set it to xx.xx.xx.1-255. That was the first thing in the documentation that popped out at me.nascar241993 wrote:http://dreamcast-talk.com/forum/viewtop ... 704#p92834Xiden wrote:Do you mind posting your router model on here I can do some research on itnascar241993 wrote:That I'm not sure of. I'll try restarting the router first, cause I discovered that it's been running since the day we got it.
EDIT: Looks like an AT&T DSL modem is required to use third-party routers.
EDIT 2: Restarting the router didn't work. Too bad my router doesn't have a WAN port, so I can't bypass the router.
Posted it in a reply back on page 1.
DreamPi - Fails to answer Dreamcast call after new router installed.
Moderator: pcwzrd13
- Xiden
- Developer
- Posts: 2225
- Dreamcast Games you play Online: All the DC games!!
Re: DreamPi - Fails to answer Dreamcast call after new router installed.
-
- lithium
- Posts: 42
- Dreamcast Games you play Online: Phantasy Star Online version 2
Re: DreamPi - Fails to answer Dreamcast call after new router installed.
It's already set to xx.xx.xx.1-255.
EDIT: It's actually called DHCP Configuration, and it's set to 192.168.1.0/255.255.255.0 (with 0 being anything between 1 and 255, I guess). I know that it's working, cause I was able to manually set my DreamPi back to its original IP (192.168.1.253).
EDIT 2: Added a couple of pictures from recent connection attempts. I'm baffled that the LVI and Viking produce different logs.
EDIT: It's actually called DHCP Configuration, and it's set to 192.168.1.0/255.255.255.0 (with 0 being anything between 1 and 255, I guess). I know that it's working, cause I was able to manually set my DreamPi back to its original IP (192.168.1.253).
EDIT 2: Added a couple of pictures from recent connection attempts. I'm baffled that the LVI and Viking produce different logs.
- SoulOfIce
- rebel
- Posts: 15
Re: DreamPi - Fails to answer Dreamcast call after new router installed.
Yeah I had that AT command before it stopped working.Xiden wrote:Is your modem AT command set to AT&F0 (Thats a zero at the end)SoulOfIce wrote:Yeah I had a strong feeling that it wasn't the issue, as I had been using PCwzrd's LVI as well and it was working just fine before the issue. The weird thing is, that it was working for me fine before, then it just stopped, and I HAVEN'T changed my router. It just straight up stopped working (By stop working I mean the Dreamcast has stopped answering the call) I also have AT&T internet as well, so maybe it has something to do with AT&T? I dunno :/
- Xiden
- Developer
- Posts: 2225
- Dreamcast Games you play Online: All the DC games!!
Re: DreamPi - Fails to answer Dreamcast call after new router installed.
Send those images to Kazade in a message on here. He should be able to diagnose the exact issuenascar241993 wrote:It's already set to xx.xx.xx.1-255.
EDIT: It's actually called DHCP Configuration, and it's set to 192.168.1.0/255.255.255.0 (with 0 being anything between 1 and 255, I guess). I know that it's working, cause I was able to manually set my DreamPi back to its original IP (192.168.1.253).
EDIT 2: Added a couple of pictures from recent connection attempts. I'm baffled that the LVI and Viking produce different logs.
-
- lithium
- Posts: 42
- Dreamcast Games you play Online: Phantasy Star Online version 2
Re: DreamPi - Fails to answer Dreamcast call after new router installed.
Message sent. It baffles me that the DreamPi says CONNECT at the end with the LVI, but the call still doesn't answer.
- Xiden
- Developer
- Posts: 2225
- Dreamcast Games you play Online: All the DC games!!
Re: DreamPi - Fails to answer Dreamcast call after new router installed.
Its supposed to say Connect. When I having issues I thought it was strange too lol. So it least it appears for now your pi, modem, and software are fine.
Just out of curiosity, have you tried unplugging and replugging your dreamcast's modem? Maybe some how it got unseated? Thats the only other idea I have right now while you wait to hear from kazade.
Just out of curiosity, have you tried unplugging and replugging your dreamcast's modem? Maybe some how it got unseated? Thats the only other idea I have right now while you wait to hear from kazade.
-
- lithium
- Posts: 42
- Dreamcast Games you play Online: Phantasy Star Online version 2
Re: DreamPi - Fails to answer Dreamcast call after new router installed.
Can't be that it's not seated properly, since I've been swapping it out for the BBA to play PSOv2. I'm not sure why it's not answering the call despite the CONNECT message.
-
- Developer
- Posts: 264
- Dreamcast Games you play Online: Lots!
Re: DreamPi - Fails to answer Dreamcast call after new router installed.
Hi, sorry I've been a bit crap at replying - I've been without internet for 3 weeks and I have a lot going on at the moment.
Looking at the images, the LVI just isn't working at all. That's just showing you the output as the DreamPi sends the dial tone, but it's not showing anything for any kind of incoming call from the Dreamcast.
The Viking is "working" in that it detects the Dreamcast dialling and then tells the modem to answer but then it's timing out waiting for the modem to respond with "CONNECT"...
Just to confirm, this is DreamPi 1.4 right? I know there was a problem in earlier versions that would show this problem. What I think is happening is actually the modem is responding with something that I'm not expecting, but I can't debug it unless you can edit the code. If you *can* edit the code then find this line (in /home/pi/dreampi/dreampi.py)...
for resp in VALID_RESPONSES:
and on the line directly above it, add the following:
logger.info(line)
Make sure the indentation matches (e.g. the line you add, lines up with spaces with the line below)
That should log all the responses from the modem and then we should see what happened.
Unfortunately without internet at home I can't work on Dreampi 1.5, and so can't add the logging into the next version myself
Looking at the images, the LVI just isn't working at all. That's just showing you the output as the DreamPi sends the dial tone, but it's not showing anything for any kind of incoming call from the Dreamcast.
The Viking is "working" in that it detects the Dreamcast dialling and then tells the modem to answer but then it's timing out waiting for the modem to respond with "CONNECT"...
Just to confirm, this is DreamPi 1.4 right? I know there was a problem in earlier versions that would show this problem. What I think is happening is actually the modem is responding with something that I'm not expecting, but I can't debug it unless you can edit the code. If you *can* edit the code then find this line (in /home/pi/dreampi/dreampi.py)...
for resp in VALID_RESPONSES:
and on the line directly above it, add the following:
logger.info(line)
Make sure the indentation matches (e.g. the line you add, lines up with spaces with the line below)
That should log all the responses from the modem and then we should see what happened.
Unfortunately without internet at home I can't work on Dreampi 1.5, and so can't add the logging into the next version myself
- Xiden
- Developer
- Posts: 2225
- Dreamcast Games you play Online: All the DC games!!
Re: DreamPi - Fails to answer Dreamcast call after new router installed.
Are you also using ATT's router? Or using a standalone 3rd party router? Sounds like their equipment is no bueno. If you are using their router, is it possible to switch to your own router?SoulOfIce wrote:Yeah I had that AT command before it stopped working.Xiden wrote:Is your modem AT command set to AT&F0 (Thats a zero at the end)SoulOfIce wrote:Yeah I had a strong feeling that it wasn't the issue, as I had been using PCwzrd's LVI as well and it was working just fine before the issue. The weird thing is, that it was working for me fine before, then it just stopped, and I HAVEN'T changed my router. It just straight up stopped working (By stop working I mean the Dreamcast has stopped answering the call) I also have AT&T internet as well, so maybe it has something to do with AT&T? I dunno :/
If you can, post your RasPi output to here so we can compare it and see if both you guys are getting the same issues.
- SoulOfIce
- rebel
- Posts: 15
Re: DreamPi - Fails to answer Dreamcast call after new router installed.
Yep I am also using an ATT router, which makes me have an assumption that it could be a fireware update that they released that's causing DreamPi to not work with their in house routers.Xiden wrote:Are you also using ATT's router? Or using a standalone 3rd party router? Sounds like their equipment is no bueno. If you are using their router, is it possible to switch to your own router?SoulOfIce wrote:Yeah I had that AT command before it stopped working.Xiden wrote:
Is your modem AT command set to AT&F0 (Thats a zero at the end)
If you can, post your RasPi output to here so we can compare it and see if both you guys are getting the same issues.
And sure, I have a similar log to Nascar, cept' the ending is alot more different.