Id say your best bet is to reflow the whole board, just make sure to add flux to all the contacts and give it a good even sweep with a head gun and use kapcom tape or foil around the plastic dc connectors to keep them from melting... it should do the trick if a solder joint is loose and disconnected
Right just need something advice ive installed a gd emu when playing a game the sound will drop off and will stop loading and crash in game ive tried...
When i plug in vmu to controller port . The controller not work. If I unplug vmu controller work fine, but I must reset Vmu then, because hang on.Vmu...