Hi all, I am new here so first of, really nice to meet you all.
I'm trying to burn a Code Breaker disc in order to force launch some game into VGA mode.
However, after several attempts my Dreamcast refuses to read the burned disc so I guess I might be doing something wrong.
I tried burning the image both with imgBurn and DiscJuggler with 2 different burner drives. However the discs I am using are the same. Could the problem come from the CD-R?
Also, I noticed that with both burner drives, I can not get the burning speed lower than 10x. I did read in various places that burning speed should be as slow as possible so I'd like to confirm if this could be the source of the issue?
It is worth mentioning that I burned the Code Breaker loader under similar conditions (same burner, imgBurn, 10x) and this one is being read by the Dreamcast.
Any idea?
Thanks a lot for your help.
Code breaker burning issues (solved)
Moderator: pcwzrd13
- mr.kaeru
- lithium
- Posts: 46
- Location: Tokyo, Japan
Code breaker burning issues (solved)
Last edited by mr.kaeru on Fri Apr 16, 2021 11:12 am, edited 1 time in total.
- fafadou
- Gold Lion
- Posts: 1664
Re: Code breaker burning issues
Your codebreaker is a cdi image ?
Verbatim is a good type of CD, but be sure there are CD-R and not CD+R.
with imgburn at low speed as you (10x) I never had problem.
Verbatim is a good type of CD, but be sure there are CD-R and not CD+R.
with imgburn at low speed as you (10x) I never had problem.
- Aleron Ives
- Outrun
- Posts: 1117
- Dreamcast Games you play Online: Phantasy Star Online
Phantasy Star Online Ver.2 - Location: California
- Contact:
Re: Code breaker burning issues
You could try burning BlueCrab's PSO boot disc, instead. It will boot any non-WinCE game and enable VGA mode, too.
"Fear the HUnewearl."
- mr.kaeru
- lithium
- Posts: 46
- Location: Tokyo, Japan
Re: Code breaker burning issues
Hi, thanks for your replies.
Yes, code breaker is a cdi image. I'll admit I bought the cheapest CD-R I could find and I can confirm these are CD-R, not +R or RW etc.
I'll try finding a bluecrab's PSO boot as suggested.
I'll keep you post! Let me know if you have any other suggestion.
Yes, code breaker is a cdi image. I'll admit I bought the cheapest CD-R I could find and I can confirm these are CD-R, not +R or RW etc.
I'll try finding a bluecrab's PSO boot as suggested.
I'll keep you post! Let me know if you have any other suggestion.
- mr.kaeru
- lithium
- Posts: 46
- Location: Tokyo, Japan
Re: Code breaker burning issues
Quick update.
I managed to get the PSO boot disc to run on my DC while burned through the same set up that didn't give me a run-able Code Breaker disc. Maybe the cdi I found for Code Breaker wasn't working?
For anyone interested I got the PSO boot disc CDI from this page: http://dcevolution.sourceforge.net/inde ... so_patcher
However, the reason why I wanted the boot disc did not solve my initial issue. I opened a separate thread as it is a separate matter. https://www.dreamcast-talk.com/forum/vi ... 42&t=13050
Thanks again!
I managed to get the PSO boot disc to run on my DC while burned through the same set up that didn't give me a run-able Code Breaker disc. Maybe the cdi I found for Code Breaker wasn't working?
For anyone interested I got the PSO boot disc CDI from this page: http://dcevolution.sourceforge.net/inde ... so_patcher
However, the reason why I wanted the boot disc did not solve my initial issue. I opened a separate thread as it is a separate matter. https://www.dreamcast-talk.com/forum/vi ... 42&t=13050
Thanks again!