Moderator: pcwzrd13
undermark5 wrote:So, it is weird, I could have sworn that the console would power on and load into the menu, but now that doesn't happen. If the drive is unplugged it powers on the vmu chirps and there is no a/v out. If the drive is plugged in, the led strobes but the console doesn't seem to ever power off again no a/v out. I've reflowed the solder on the pins connecting the PSU to the mb and made sure they're making a good connection. None of the capacitors look bad, but I don't know how to test them. Voltages are 1.5V 4.5V and 11.5V last I checked and that is the same with and without the drive plugged in.
aldair wrote:undermark5 wrote:So, it is weird, I could have sworn that the console would power on and load into the menu, but now that doesn't happen. If the drive is unplugged it powers on the vmu chirps and there is no a/v out. If the drive is plugged in, the led strobes but the console doesn't seem to ever power off again no a/v out. I've reflowed the solder on the pins connecting the PSU to the mb and made sure they're making a good connection. None of the capacitors look bad, but I don't know how to test them. Voltages are 1.5V 4.5V and 11.5V last I checked and that is the same with and without the drive plugged in.
Voltage is 3.3 and not 1.5
Users browsing this forum: No registered users