Page 1 of 1
PSO PAL v2
Posted: Mon Sep 15, 2008 10:04 pm
by Radkin
How do I set up a PAL version 2 to boot with a NTSC-U Dreamcast console?
Re: PSO PAL v2
Posted: Tue Sep 16, 2008 1:06 am
by max4242
http://www.snesorama.us/board/showthread.php?t=20462 uptiona boot disk, lets you play import games
BTW it might take a few trys to load it up
Re: PSO PAL v2
Posted: Tue Sep 16, 2008 7:16 am
by Bob Dobbs
Yes, you are correct about the wait...as well as Utopia working, thanx!
Re: PSO PAL v2
Posted: Tue Sep 16, 2008 7:52 pm
by Radkin
A I have to do now is talk to Crono so he can register my console and help me get online.
Re: PSO PAL v2
Posted: Tue Sep 16, 2008 9:23 pm
by Bob Dobbs
The only problem now is that according to Crono, the Dreamcast is not even attempting to connect via the BBA. On our end it looks as if it is trying.
Re: PSO PAL v2
Posted: Sat Sep 20, 2008 2:14 pm
by Bob Dobbs
Ok, here is what I have and what I tried and what happened.
1. NTSC/U Dreamcast (flashed to Schthack IP).
2. PSOv2 PAL (the real deal).
3. Utopia 1.5 Boot disc.
4. BBA (HIT-0400)
5. VMU with original PSOv2 NTSC/U save.
Scenario:
1. Booted up with Utopia, then swapped disc with PSOv2 PAL.
2. PSOv2 PAL booted up and recognized the VMU save.
3. I selected the ONLINE option and answered the questions to connect.
4. I then saw the burst screen and waited.
5. It eventually went to a black screen with the Action Pallette doing a rotation thing. This is something I never have seen the the NTSC/U version.
6. The I would get the network/connection error.
7. Crono was monitoring the event but stated that he never saw the Dreamcast try to connect via the IP I gave him.
8. The BBA works because it goes online with Q3, XDP and PW3.0.
Any thoughts, please?