Addition to compatible modem list

[Scrivani]

the wvdialconf last result tells that the modem is there, but in use. So maybe ready to dial.

Just to make sure, perform this:

sudo service dreampi stop
wvdialconf

then get the new result.

then reboot the raspberrypi , wait 3 minutes, and look if the data light is up.

[Scrivani]

please update the repository:

https://www.dreamcast-talk.com/forum/vi ... 14#p180814

and perform :

sudo apt-get update
sudo apt-get upgrade

[fifich]

I had my Pi updated and I performed the command. It now detects my modem. The data light lights up, but it did that before too.

I tried connecting to the internet again, but my Dreamcast couldn´t connect. The modem itself doesn´t seem to respond to that attempt.

[Scrivani]

Hey good, the modem is ready to go, nice.

But, where is the LVI circuit? Have you built one? Internal LVI inside the modem with a dc-dc step-up converter or external LVI in the RJ11 cable cord?

the line needs 9v if your dreamcast modem is NTSC and 18v if PAL/JP. Anyway, 18v fits every case good.

[fifich]

I have a PAL Dreamcast. I recently got an LVI that supplies 18v from Dreamcast Live shop. I got the USB plugged in my Pi, so it should be getting power. I have checked for voltage with my multimeter and I got 18 volts.

[Scrivani]

I have a PAL Dreamcast. I recently got an LVI that supplies 18v from Dreamcast Live shop. I got the USB plugged in my Pi, so it should be getting power. I have checked for voltage with my multimeter and I got 18 volts.

ok now is more strange.

Do you have discord or similar by any chance?