Moderator: pcwzrd13
Code: Select all
jason@jason-desktop:~$ tail -f /var/log/mgetty/mg_ttyACM0.log
01/17 15:38:30 CM0 mgetty: interim release 1.1.36-Jun15
01/17 15:38:30 CM0 WARNING: parent process not init(pid=1), but pid=2149 (bash)
01/17 15:38:30 CM0 check for lockfiles
01/17 15:38:30 CM0 locking the line
01/17 15:38:30 CM0 lowering DTR to reset Modem
01/17 15:38:31 CM0 send: \dATQ0V1H0[0d]
01/17 15:38:32 CM0 waiting for ``OK'' ** found **
01/17 15:38:32 CM0 send: AT[0d]
01/17 15:38:32 CM0 waiting for ``OK'' ** found **
01/17 15:38:32 CM0 waiting...
01/17 15:39:02 CM0 wfr: waiting for ``RING''
01/17 15:39:02 CM0 cannot set controlling tty (ioctl): Operation not permitted
01/17 15:39:02 CM0 >>> this might be caused because you have run mgetty/vgetty
01/17 15:39:02 CM0 >>> from the command line. Don't do that, use /etc/inittab!
01/17 15:39:02 CM0 send: ATA[0d]
01/17 15:39:02 CM0 waiting for ``CONNECT''
01/17 15:39:56 CM0 found action string: ``NO CARRIER''
01/17 15:39:56 ##### failed A_FAIL dev=ttyACM0, pid=2167, caller='none', conn='', name=''
this is correct, if you don't want to use a voltage inducer you will need a revision A modem.Kingbuzzo wrote:revision B requires the voltage I believe.
Users browsing this forum: No registered users