Moderator: pcwzrd13
USB Line Voltage Inducer
By Zarradeth
2 layer board of 1.90 x 1.36 inches (48.3 x 34.5 mm).
Shared on January 16th, 2017 06:53
(v1.8)
A board for building a line voltage inducer (as part of a phone cable) powered by USB. Meant for use with a Dreamcast and DreamPi. The board includes a DC-DC boost converter which boosts the 5v supplied via the USB to the required voltage- both 9v and 18v are supported, you just have to populate the board for the appropriate voltage. Phone jacks are used instead of splicing the cable to make the inducer as easy to use as possible.
U1 is a TI MC33063AP
D0 should be a Schottky Diode with a high enough voltage rating
J1 and J2 were designed for Stewart Connector’s SS-6466S-A-PG1
J3 was designed for Amphenol FCI’s 73725-0110BLF
Users browsing this forum: No registered users