I recently took my other twinstick out of storage and found that it doesn't register at all. Completely dead!
I had a quick check of the pins in the connector and they all look good. Apart from that, that's all I've had time to do so far.
When I get a chance I'll:
clean the connector pins
Open it up and see if everything is still connected
test continuity across switches
inspect the board for any corrosion/shorts
Anything else I should be aware of when dealing with a twinstick or is there anything that could be the cause?
Haven't heard of them being prone to just dying so I was surprised this one is as lifeless.