Sorry man, i don't have a lightgun, therefore i wasn't even able to progress any further to the menus.javierv14 wrote:Are you using lightgun on controller 3?, controller 3 & 4 are player 1 & player 2freakdave wrote:No lightgun here either, at least i can confirm Attract Mode working just fine
Ranger Mission
- freakdave
- undertow
- Posts: 25
- Contact:
Re: Ranger Mission
Too easy! Just as I thought!
- mistamontiel
- Shark Patrol
- Posts: 1966
- Dreamcast Games you play Online: Errythan except Tetris o.0
- Location: Miami, FL, CUBA
- Contact:
- Vgesoterica
- Uber
- Posts: 1054
- Dreamcast Games you play Online: Phantasy Star / Bomberman
Re: Ranger Mission
Just played it on my DC and it worked great on my PVM. Sadly it freezes my capture card but for some reason the Elgato HD 60 S and DC never play nice together.
Captured on Demul. A bit touchy getting the guns to calibrate. I ended up assigning Port 3 to controller and Port 4 to light gun, then using Port 3 to enter the service menu and calibrate the guns. Then I just used Port 4 (Player 2) the entire game...no issues except some slight mouse lag.
But I was never able to get it working for Player 1 on Demul so hopefully that helps some people who dont have an ODE for their DC. For me PVM with light gun was the way to go! (outside of losing sync for capturing)
Captured on Demul. A bit touchy getting the guns to calibrate. I ended up assigning Port 3 to controller and Port 4 to light gun, then using Port 3 to enter the service menu and calibrate the guns. Then I just used Port 4 (Player 2) the entire game...no issues except some slight mouse lag.
But I was never able to get it working for Player 1 on Demul so hopefully that helps some people who dont have an ODE for their DC. For me PVM with light gun was the way to go! (outside of losing sync for capturing)
-
- fire
- Posts: 81
Re: Ranger Mission
wao you are lucky then cause i just try it on demul i could not make that start button work neither in joy 1,2,3 or 4Vgesoterica wrote:Just played it on my DC and it worked great on my PVM. Sadly it freezes my capture card but for some reason the Elgato HD 60 S and DC never play nice together.
Captured on Demul. A bit touchy getting the guns to calibrate. I ended up assigning Port 3 to controller and Port 4 to light gun, then using Port 3 to enter the service menu and calibrate the guns. Then I just used Port 4 (Player 2) the entire game...no issues except some slight mouse lag.
But I was never able to get it working for Player 1 on Demul so hopefully that helps some people who dont have an ODE for their DC. For me PVM with light gun was the way to go! (outside of losing sync for capturing)
i could not play the GDI on demul at all only the original atomiswave rom work for me correctly..i don't have a light gun
so i calibrate demul to use my mouse as a light gun..workd like a charm but only on the rom, GDI has been a pain in the ass...
- titchgamer
- rebel
- Posts: 24
Re: Ranger Mission
I just had it running on my GDEMU on my CRT with 2 lightguns.
Works great bar a few minor issues...
It was a little hard to get into the menu, took a few attempts but got there in the end. Niot sure if that was down to my old guns or the game.
I found the reload kept trying to reload between shots so it was screwing up my gameplay.
I found changing it to handgun or auto in the menu fixed that issue.
The only thing I could not get to work way Player 2!
In the test menu it would not register my second gun plugged into port 4, I tried swapping the guns to rule out a gun problem but that was ok and I know the port is good as I tested it.
So other than P2 not being recognised working good on gdemu
Works great bar a few minor issues...
It was a little hard to get into the menu, took a few attempts but got there in the end. Niot sure if that was down to my old guns or the game.
I found the reload kept trying to reload between shots so it was screwing up my gameplay.
I found changing it to handgun or auto in the menu fixed that issue.
The only thing I could not get to work way Player 2!
In the test menu it would not register my second gun plugged into port 4, I tried swapping the guns to rule out a gun problem but that was ok and I know the port is good as I tested it.
So other than P2 not being recognised working good on gdemu
-
- rebel
- Posts: 21
- Dreamcast Games you play Online: I used to play Quake
Re: Ranger Mission
Works pretty good on a CRT. Using a Official Sega Japanese gun. What type of gun is everyone using?
- titchgamer
- rebel
- Posts: 24
Re: Ranger Mission
Did you try player 2?tokyo-j wrote:Works pretty good on a CRT. Using a Official Sega Japanese gun. What type of gun is everyone using?
I am using the standard DC gun.
- megavolt85
- Developer
- Posts: 1966
Re: Ranger Mission
in Demul right mouse button is B, middle mouse button is STARTVgesoterica wrote: Captured on Demul. A bit touchy getting the guns to calibrate. I ended up assigning Port 3 to controller and Port 4 to light gun, then using Port 3 to enter the service menu and calibrate the guns. Then I just used Port 4 (Player 2) the entire game...no issues except some slight mouse lag.
my freind test is with japan light gun and with pelican, both light gun fine work and calibratetitchgamer wrote:In the test menu it would not register my second gun plugged into port 4, I tried swapping the guns to rule out a gun problem but that was ok and I know the port is good as I tested it.
- titchgamer
- rebel
- Posts: 24
Re: Ranger Mission
I was using the normal EU DC guns like this one:megavolt85 wrote:in Demul right mouse button is B, middle mouse button is STARTVgesoterica wrote: Captured on Demul. A bit touchy getting the guns to calibrate. I ended up assigning Port 3 to controller and Port 4 to light gun, then using Port 3 to enter the service menu and calibrate the guns. Then I just used Port 4 (Player 2) the entire game...no issues except some slight mouse lag.
my freind test is with japan light gun and with pelican, both light gun fine work and calibratetitchgamer wrote:In the test menu it would not register my second gun plugged into port 4, I tried swapping the guns to rule out a gun problem but that was ok and I know the port is good as I tested it.
O992SOhXRow.jpg
https://upload.wikimedia.org/wikipedia/ ... ht_gun.jpg
Is he running with a gdemu?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 7895 Views
-
Last post by Ian Micheal
-
- 2 Replies
- 4084 Views
-
Last post by sonik
-
- 0 Replies
- 1985 Views
-
Last post by Retrofan21