USB4MAPLE adapter
Moderators: pcwzrd13, deluxux, VasiliyRS
- MoeFoh
- Outrun
- Posts: 1135
Re: USB4MAPLE adapter
@megavolt85 - does this adapter require an original xbox 360 controller or might a clone knockoff work (which is what I have)?
What about other 3rd party devices which use the standard controller vid, pid?
What about other 3rd party devices which use the standard controller vid, pid?
- megavolt85
- Developer
- Posts: 1948
Re: USB4MAPLE adapter
I don't have an answer to this question, the only way to find out is to check.
I don’t have clones to test, so after checking, tell me if it works or not
I think since the clone is compatible with the console, it will be compatible with the adapter
I don’t have clones to test, so after checking, tell me if it works or not
I think since the clone is compatible with the console, it will be compatible with the adapter
- rpf16rj
- undertow
- Posts: 33
- Location: Brazil
- Contact:
Re: USB4MAPLE adapter
This one:megavolt85 wrote:what USB hub are you using, can you take a photo?
*ignore cable with glue, just did solder usb-c cable to minimize power issues.
Another question, i has this receiver RF from Slim model, model 1410. This work on Windows with soldered wires to USB points. I did test on adapter but don't work.
Is possible use this version or only Fat model is supported?
The USB VID is:
USB\VID_045E&PID_02AA&REV_0330
Curious tester of old games and software and electronic modder sometimes.
Youtube channel: https://www.youtube.com/@rpf16rj1
Youtube channel: https://www.youtube.com/@rpf16rj1
- rpf16rj
- undertow
- Posts: 33
- Location: Brazil
- Contact:
Re: USB4MAPLE adapter
Worked, awesome! Thanks.megavolt85 wrote:test itrpf16rj wrote: The USB VID is:
USB\VID_045E&PID_02AA&REV_0330
USB4MAPLE(test RF360s).zip
Now, i need a case for put all
https://www.youtube.com/shorts/U6Pqpjst2co
Curious tester of old games and software and electronic modder sometimes.
Youtube channel: https://www.youtube.com/@rpf16rj1
Youtube channel: https://www.youtube.com/@rpf16rj1
- Xerxes3rd
- fire
- Posts: 83
Re: USB4MAPLE adapter
This is excellent! If I may ask: are you running the Maple driver using PIO on the RP2040?
- pcwzrd13
- Seen Any Sailors?
- Posts: 7123
- Dreamcast Games you play Online: All of them! I'm able to connect with dial-up or broadband.
- Location: USA
- Contact:
Re: USB4MAPLE adapter
Couple questions for you @Megavolt:
1. Any chance you'll look into adding Bluetooth support via a USB dongle? That could potentially add support for a ton of modern controllers.
2. Is there a way to add save files to the virtual VMU via a PC? Not sure if it's possible to read the contents of the .bin file. Would be really cool if you could do that.
1. Any chance you'll look into adding Bluetooth support via a USB dongle? That could potentially add support for a ton of modern controllers.
2. Is there a way to add save files to the virtual VMU via a PC? Not sure if it's possible to read the contents of the .bin file. Would be really cool if you could do that.
PSO Characters:
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
- megavolt85
- Developer
- Posts: 1948
Re: USB4MAPLE adapter
at first I used this project, but it was missing a lot of packets, in the end I completely rewrote the PIO module in order to read data from maple in whole bytes.Xerxes3rd wrote:are you running the Maple driver using PIO on the RP2040?
I use the second core and both PIO modules for MAPLE, the first core is used for USB
At the moment I am not planning such an opportunity, maybe in the future I will think about itpcwzrd13 wrote: 1. Any chance you'll look into adding Bluetooth support via a USB dongle? That could potentially add support for a ton of modern controllers.
These are regular VMU dumps, they are compatible with emulators and VMU explorerpcwzrd13 wrote: 2. Is there a way to add save files to the virtual VMU via a PC? Not sure if it's possible to read the contents of the .bin file. Would be really cool if you could do that.
- MoeFoh
- Outrun
- Posts: 1135
Re: USB4MAPLE adapter
I plan on testing the 8bitdo usb2bt v1 adapter and the Mayflash usb2bt adapters. Both adapters work with the Brooks WingmanSD. Both adapters setup as a wired Xbox 360 controller in Xinput mode, so I think there is a decent chance of it working.pcwzrd13 wrote:Couple questions for you @Megavolt:
1. Any chance you'll look into adding Bluetooth support via a USB dongle? That could potentially add support for a ton of modern controllers.
2. Is there a way to add save files to the virtual VMU via a PC? Not sure if it's possible to read the contents of the .bin file. Would be really cool if you could do that.
I just got all the parts for Mega Maple (tm) adapter - just need to make it.
Last edited by MoeFoh on Sat Apr 20, 2024 2:47 pm, edited 1 time in total.
- pcwzrd13
- Seen Any Sailors?
- Posts: 7123
- Dreamcast Games you play Online: All of them! I'm able to connect with dial-up or broadband.
- Location: USA
- Contact:
Re: USB4MAPLE adapter
Yeah I thought of that but for the price of everything you can just buy a dedicated Dreamcast Bluetooth adapter. lol The ability to just add a cheap USB Bluetooth dongle would be awesome.MoeFoh wrote:I plan on testing the 8bitdo usb2bt v1 adapter and Mayflash usb2bt adapter. Both adapters work with the Brooks WingmanSD. Both adapters setup as a wired Xbox 360 controller in Xinput mode, so I think there is a decent chance of it working.pcwzrd13 wrote: 1. Any chance you'll look into adding Bluetooth support via a USB dongle? That could potentially add support for a ton of modern controllers.
PSO Characters:
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live