USB4MAPLE adapter
Moderators: pcwzrd13, deluxux, VasiliyRS
-
- shadow
- Posts: 7
- Dreamcast Games you play Online: Gundam
Re: USB4MAPLE adapter
I tested some additional adapters.
The older Mayflash Magic NS v1 does not work for me either does the Brooks Wingman XB2 since I had these lying around. They do get proper power and allow pairing though.
Not expecting these to work but saving people the trouble.
The older Mayflash Magic NS v1 does not work for me either does the Brooks Wingman XB2 since I had these lying around. They do get proper power and allow pairing though.
Not expecting these to work but saving people the trouble.
- megavolt85
- Developer
- Posts: 1885
Re: USB4MAPLE adapter
Does anyone have a USB-UART and any interesting USB controllers/steering wheels?
-
- undertow
- Posts: 25
- Dreamcast Games you play Online: Ooga Booga, Tetris Online, Alien Front, 4x4 Evo
Re: USB4MAPLE adapter
I have steering wheel Logitech G29 for PS4. I will get a USB-UART coming soon to get logs and send to you.megavolt85 wrote:Does anyone have a USB-UART and any interesting USB controllers/steering wheels?
- MoeFoh
- Uber
- Posts: 1080
Re: USB4MAPLE adapter
Everything's been working great until I tried VMU Emulation. Controller is always working from the hub - however, the VMU has only showed up twice. Tried different hubs and flash drives to no avail. The flash drive has vmu.bin on it and I can open it up on emuexplorer.exe. Perhaps the detection part of the firmware needs looked at, idk?
- megavolt85
- Developer
- Posts: 1885
Re: USB4MAPLE adapter
I started testing vmu emulation and noticed one feature: VMU will not work if the flash drive is inserted into the hub before the controller.
if a flash drive is inserted into the first port of the hub, and a joystick is inserted into the second port, then the vmu does not work, you need to swap the usb and everything starts working.
try it, maybe it will help you
if a flash drive is inserted into the first port of the hub, and a joystick is inserted into the second port, then the vmu does not work, you need to swap the usb and everything starts working.
try it, maybe it will help you
- MoeFoh
- Uber
- Posts: 1080
Re: USB4MAPLE adapter
Could vmu emulation work with just a flash drive and no controller or hub? Would be great way to backup saves to a pc and vice versa.megavolt85 wrote:I started testing vmu emulation and noticed one feature: VMU will not work if the flash drive is inserted into the hub before the controller.
if a flash drive is inserted into the first port of the hub, and a joystick is inserted into the second port, then the vmu does not work, you need to swap the usb and everything starts working.
try it, maybe it will help you
- megavolt85
- Developer
- Posts: 1885
Re: USB4MAPLE adapter
noMoeFoh wrote:Could vmu emulation work with just a flash drive and no controller or hub?
- pcwzrd13
- Seen Any Sailors?
- Posts: 7097
- Dreamcast Games you play Online: All of them! I'm able to connect with dial-up or broadband.
- Location: USA
- Contact:
Re: USB4MAPLE adapter
So I noticed Y-axis inversion is enabled by default with this adapter. Shouldn't it be disabled? Most games have it disabled by default so I have to go into the settings and enable it to disable it. lol
PSO Characters:
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
- MoeFoh
- Uber
- Posts: 1080
Re: USB4MAPLE adapter
VMU Emulation working now using Kingston 16GB DataTraveler SE9 2.0 Flash Drive (DTSE9H/16GBZ).
- MoeFoh
- Uber
- Posts: 1080
Re: USB4MAPLE adapter
Rumble using wired Xbox 360 controller:
Motor 1 & Motor 2 test OK with or without a hub on 240p Test Suite.
Playing 4 Wheel Thunder:
Rumble works direct connection.
With hub no rumble.
Motor 1 & Motor 2 test OK with or without a hub on 240p Test Suite.
Playing 4 Wheel Thunder:
Rumble works direct connection.
With hub no rumble.