I have a BBA connected to my router which is then connected to my modem.
In XDP I configured my IP, subnet mask, DNS etc using the info from /configip
I can use XDP to connect to websites and I can connect to PSO using the Sylverant auto connect disc.
BUTTTT I can't connect to Quake 3 or Toy Racer. I'm honestly not sure what to do for Q3 - back in the day I used to leave all the fields blank and the master list would pop up, but not anymore.
What information do I need to enter/adjust to connect online? On the list of servers on this site (http://dreamcast-talk.com/forum/q3master.php) I can see the addresses, for example 193.218.154.229:27963, but I'm not sure where to enter this information. If I try to enter it as IP and or DNS I'm unable to enter the ':27963' part.
Can someone please explain to a dummie how to do this?
How to connect to Quake 3 server? (for dummies)
Moderator: pcwzrd13
- brourke228
- Game Server Admin
- Posts: 705
- Dreamcast Games you play Online: Only PSO v2, 4x4 Evo, Quake III Arena, StarLancer, Max Pool, Planet Ring
- Location: RI
Re: How to connect to Quake 3 server? (for dummies)
To get our Quake 3 master list to show up in-game you will need to set your primary DNS in Quake 3 to our server IP address. It is currently 173.69.38.20.
-
- Graffiti Grind
- Posts: 310
Re: How to connect to Quake 3 server? (for dummies)
Okay great, should I just leave the other things as 0.0.0.0?brourke228 wrote:To get our Quake 3 master list to show up in-game you will need to set your primary DNS in Quake 3 to our server IP address. It is currently 173.69.38.20.
Edit - tried entering the DNS and leaving the other fields as 0.0.0.0 but no luck. It dailed and said it was connected but when it was 'scanning internet' nothing was found. Damn. Any ideas?
aka DavidHK on DC games.
- Bob Dobbs
- Sub Genius
- Posts: 4393
- Dreamcast Games you play Online: PSO, AFO, PBA, 4x4 Evo, IGP, Planet Ring and Max Pool
- Location: USA
- Contact:
Re: How to connect to Quake 3 server? (for dummies)
Good news, that means you are connected, and you are most likely seeing the "Master Server Not Found" message. At this point, you just have to select the option at the bottom right (the "More" button), then enter the IP addy and the port. From there, select the bottom right button again (I believe it is the "Info" button).
You should be good from there. Looking forward to seeing you online.
You should be good from there. Looking forward to seeing you online.
Regards,
Bob Dobbs
Bob Dobbs
-
- Arabian Night
- Posts: 335
- Dreamcast Games you play Online: Quake III Arena, Maximum Pool 4X4 Evo, PSO V.2,
Re: How to connect to Quake 3 server? (for dummies)
I am having the same exact problem that dave_van_damn had. It connects, says master list not found, and I've tried inputting all the ip's from the master list under the "more" tab but nothing works!
I've tried all the suggestions that you've made Bob but I still can't get it to work. I watched pcwzrd's video on how to configure the BBA and followed the instructions per the video but I still cant get the master list to show up!
I would greatly appreciate any help because fragging Friday is tomorrow and I want to actually play!!!!!!!!!
I've tried all the suggestions that you've made Bob but I still can't get it to work. I watched pcwzrd's video on how to configure the BBA and followed the instructions per the video but I still cant get the master list to show up!
I would greatly appreciate any help because fragging Friday is tomorrow and I want to actually play!!!!!!!!!
- Nico0020
- Sunday Shootout
- Posts: 658
- Dreamcast Games you play Online: PSOv2
Quake 3 Arena
Alien Front Online
Chu Chu Rocket
Ooga Booga
And more
Re: How to connect to Quake 3 server? (for dummies)
Ive had the same issues for quite awhile. PSO works fine, but I can never connect to a quake 3 server. I connect and try manually inputting server IPs with no luck...
Sent from my SCL21 using Tapatalk
Sent from my SCL21 using Tapatalk
-
- noob
- Posts: 2
- Dreamcast Games you play Online: Quake
PSO
Re: How to connect to Quake 3 server? (for dummies)
I am currently having this issue. I use a PC-DC server and when I try to directly connect to the servers it does not work. I am using a PC-DC server with the raspberry pi. Not dream pi.
-
- noob
- Posts: 2
- Dreamcast Games you play Online: Quake
PSO
Re: How to connect to Quake 3 server? (for dummies)
I was thinking about my pi pc-dc server last night. My issue maybe caused by using wifi and not Ethernet. I will post more if I figure it out.
- LucidSegaDreams
- rebel
- Posts: 16
- Dreamcast Games you play Online: Toy Racer
QA3
Maximum Pool - Contact:
Re: How to connect to Quake 3 server? (for dummies)
Any luck on a fix for this? Having same issue getting my bba to show the server lists. DreamPi/dial up works no problem with this game...
- pcwzrd13
- Seen Any Sailors?
- Posts: 7103
- Dreamcast Games you play Online: All of them! I'm able to connect with dial-up or broadband.
- Location: USA
- Contact:
Re: How to connect to Quake 3 server? (for dummies)
What are you using for your DNS server?LucidSegaDreams wrote:Any luck on a fix for this? Having same issue getting my bba to show the server lists. DreamPi/dial up works no problem with this game...
PSO Characters:
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live
Teal'c - lvl 119 HUcast - GC# 11666
Alto - lvl 39 FOnewm - GC# 12964
YouTube Channel : Dreamcast Live